Farm-duty hub for implements that don't leave the field. Matches a 6 on 6" pattern and 3" pilot, fits AS3000F spindles, and is for low-speed agricultural use only. ... Features: Agricultural hub only - low-speed implement use, not for highway service Fits Agricultural Spindle AS3000F Specs: Axle rating: 6,000 lb per axle set when two hubs are used (3,000 lb per hub) Bolt pattern: 6 on 6" Pilot hole: 3" diameter Wheel hardware: 1/2" wheel bolts Bearings: Inner LM29749, Outer LM67048 Races: Inner LM29710, Outer LM67010 Grease seal: SL175 - 2.722" OD, 1.75" ID, single lip Grease cap: 45896 - 2.44" OD, drive-in Note: Designed for agricultural implements at low speeds (typically limited to 20 mph).
This hub-and-drum has races already installed to help speed up setup. Add bearing kit DX86ER (sold separately), then finish the job and get back on the road.Made in the USA: Quality-tested and manufactured for consistent performance. Specs Application: Axle Rating: 4,400 lbs Spindle Type: Straight spindle Brake Compatibility: 10" electric or hydraulic drum brakes Wheel Size Range: 13" to 15" Dimensions: Drum: 10" diameter x 2-1/4" wide Grease Cap Flange Diameter: 1.988" Wheel Bolt Diameter: 1/2" Bolt Pattern: Pattern: 6 on 5-1/2" Capacity: Per Hub Weight Capacity: 2,200 lbs Construction: Material: Iron Country of Origin: USA Bearing, Race, and Seal Information: Races included and pre-installed: Inner race: L68111 Outer race: LM67010 Bearings (sold separately): Inner bearing: L68149 Outer bearing: LM67048 Compatible bearing kit: DX86ER (sold separately)
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hubassembly fits idler axles E-Z Lube and standard grese caps, spindle attachment hardwdare, bearings, races, seal, and lug nuts are included E-Z Lube compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Pre-greased hub-and-drum is easy to install - no need to pack bearings Hub and drum are made in the USA Specs: Application: 3,500-lb trailer axles with #84 spindles Wheel size: 13" to 15" Bolt pattern: 5 on 4-3/4" Grease cap flange diameter: 1.988" Wheel bolt dimensions: 1/2" diameter x 1-5/16" long Weight capacity: 1,750 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hub is designed for use on trailer idler axles. Fits 3,500-lb E-Z Lube axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hubassembly fits idler axles E-Z Lube and standard grease caps, spindle attachment hardware, bearings, races, seal, and lug nuts are included E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Hub is made in the USA Specs: Application: 3,500-lb E-Z Lube trailer axles with #84 spindles Wheel size: 13" to 15" Bolt pattern: 5 on 5-1/2" Grease cap flange diameter: 1.99" Wheel bolt diameter: 1/2" Weight capacity: 1,750 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.Specs: Application & Capacity Axle rating: 5,200 - 7,000 lbs Spindle compatibility: #42 Wheel size: 16" to 17-1/2" Brake type: compatible with electric brakes Drum size: 12" diameter x 2" wide Weight capacity per hub: 3,500 Quantity: 1 assembly Bolt Pattern Pattern: 8 on 6-1/2" Wheel bolt diameter: 1/2" If you need help figuring out your bolt pattern, just scroll down for directions Included Components Bearing: 14125A I.D: 1.250" Bearing: 25580 I.D: 1.75" Grease seal: GS-2250DL I.D: 2.25" O.D: 3.376" Grease cap (drive-in, EZ Lube): DC-275L O.D: 2.72" Grease cap plug: DC-RP Lug nuts: 6-109 Nut retainer: 6-190 or 006-190-00 Spindle jam nut: 6-191 Diameter: 1" Bearing races: included and pre-installed Material Type Hub and drum: iron Determining the Bolt Pattern Figuring out your bolt pattern is easier than it sounds.
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hubassembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 14" to 15" Bolt pattern: 5 on 5" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 6,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is made for use on trailer idler axles. Fits 2K E-Z Lube and Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included. ... Features: Trailer hubassembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Large hub flange allows for use with larger wheels Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BT8 spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Hub diameter: 6.25" Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hubassembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-3/4" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hub is designed for use on trailer idler axles. Fits 2,000-lb Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub.
Hub-and-drum assembly is compatible with electric or hydraulic brakes. Fits 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 6,000-lb trailer axles with a #11 or #12 spindle Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Wheel bolt diameter: 1/2" Weight capacity: 3,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): RG06-070 Inner diameter: 2.250" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Filters
