Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.: 9/16" diameter x 1-5/8 long Grease cap flange diameter: 2.72" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580
... , grease cap, and nuts for 9/16" studs included., including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 12" diameter x 2-3/8" long Works with 12" brake assembly Bolt pattern: 8 on 6-1/2 Wheelstuds: 9/16" diameter x 1-5/8
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 8K E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, and lug nuts included. 12-1/4" brake assembly Bolt pattern: 8 on 6-1/2" Wheelstuds: 9/16" diameter x 1-5/16" long Grease cap flange diameter: 2.72" Weight capacity: 4,000 lbs Limited 1-year warranty Bearing
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 8,000-lb axles. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, and lug nuts included. assembly Bolt pattern: 8 on 6-1/2" Wheelstuds: 9/16" diameter x 1-5/16" long Grease cap flange diameter: 2.722" Weight capacity: 4,000 lbs Limited 1-year warranty Bearing, Race, and Seal
Hub is designed for use on trailer idler axles. Fits 7,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included. 6-1/2" Wheelstud dimensions: 9/16" diameter x 1-9/16" long Grease cap flange diameter: 2.722" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Hello David. All of the 2-1/4" or 2-1/2" long 9/16" wheel studs we offer have a knurl diameter of .68, such at the Kodiak Wheel Bolt #K916WB25. We do not have anything with a knurl size of .60 or .62. We do have some 1/2" studs…
There are two ways to install a fifth wheel hitch on a pick up truck. One would be to use standard bed-mounted rails. Brackets are mounted to the truck frame with the bed rails sitting directly above. Holes are drilled down through the truck bed to…
From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…
The part you are looking for is the Brass Connector for Titan Disc Brake Kit, #T4750300. This is the fitting that threads into the master cylinder that accepts the reverse lockout solenoid on your Titan actuator. I have attached a link to this part…
Yes, for this you are going to want to take a look at a powered drive conversion kit like the Bulldog Powered-Drive Kit for Single-Speed Jacks part #BD1824200100. This kit is designed specifically for Bulldog trailer jacks but can most likely be used…
Your RAM 3550 Jack will use both the Replacement Power Switch for RAM Electric Trailer Jack with Footplate #EJ-3520-PSW and the Replacement Light Switch for Electric Trailer Jack with Footplate #EJ-3520-LSW.
I may have a solution for you, but we don't have anything that matches your AL-Ko MD285 jack. You could likely make the Dutton Lainson #DL22530 jack you were looking at work, and you'd just need to add the caster #DL22414. This Dutton Lainson…
Based on my research Dexter seal 63052 appears to have been used in a military trailer application. I also could not find a current production seal that cross-references with this one. In this case the way to find a new seal is to measure the hub…
The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…
The Dexter "8-248" is a hub assembly for 3,500 lb axles that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns therefore you would need to…
We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…
Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included. 17-1/2" Bolt pattern: 8 on 6-1/2" Wheelstud dimensions: 9/16" diameter x 1-9/16" long Grease cap flange diameter: 2.72" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race
Kodiak's hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with Dacromet plating, this 1-piece unit is balanced for a smooth ride and furnished with standard races.: Axle capacity: 7,000 lbs - 8,000 lbs Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 9/16" Rotor diameter: 13" 3-Year warranty Bearing, Race and Seal
Features: Used on Dexter 50MM Nev-R-Lube Axles Capacity of 3,500 lbs per each Works with both electric and hydraulic brakes Drum size: 12" x 2" Stud size: 9/16" Bolt pattern: 8 on
Hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with a Maxx coating for excellent rust resistance, this 1-piece unit is balanced for a smooth ride. Water drains from the hat easily. corrosion 9/16" Wheelstuds and industry-standard races are included Cast iron construction ensures a favorable friction coefficient for necessary stopping power Maxx coating provides superior corrosion
Filter Results
