Swap between all your different hitch accessories with this adapter. It converts a 3" receiver into a 2-1/2" or 2" receiver. Includes pin and clip. Not for towing; use for hitch accessories only.Features: Adapts 3" hitch receiver into 2-1/2" or 2" receiver to work with your accessory Nested design: outer sleeve for 2-1/2" reciever; add inner sleeve for 2" Stays in place with tabs Includes 4" hitch pin and clip Made of heavy-duty steel with black powder coat finish Specs: Dimensions: Large tube: 6-1/4" long x 3" wide x 3" tall Smaller tube: 6-1/4" long x2-1/2" wide x2-1/2" tall Distance from center of hitch pin hole to front of the tubes: 2-3/4" Distance from from center of hitch pin hole to back of tubes: 3-1/2" Note: Do not use for towing.
Got a 2-1/2" hitch but need to run 2" accessories? This Big Truck Big RV magnetic reducer sleeve bridges the gap. Slide it into place and feel the magnets grab. Add a ball mount or carrier, slide in your hitch pin, and go.The magnets make setup easier, but the pin is what keeps the reducer from falling out when the receiver is empty. No Loss in Capacity Some adapters cut down your towing rating. This one doesn't. You keep the full capacity of your 2-1/2" receiver while running 2" accessories.
Got a 2-1/2" hitch but need to run 2" accessories? This magnetic reducer sleeve bridges the gap. Slide it into place and feel the magnets grab. Add a ball mount or carrier, slide in your hitch pin, and go.The magnets make setup easier, but the pin is what keeps the reducer from falling out when the receiver is empty. No Loss in Capacity Some adapters cut down your towing rating. This one doesn't. You keep the full capacity of your 2-1/2" receiver while running 2" accessories.
Adapter sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" hitch receiver. Hitch pin and clip or hitch lock are sold separately.Features: Reduces a 2-1/2" x2-1/2" hitch receiver opening to 2" x2" Lets you use 2" towing and hitch-mounted accessories Installs easily - slides directly into your hitch or onto the shank of your accessory Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x2-1/2" trailer hitch receiversReceiver size: 2" x2" Overall length: 5-1/2" Distance from accessory end to nearest pin hole: 3" Distance from receiver end to nearest pin hole: 2-1/2" Limited lifetime warranty Note: Weight capacity is limited to the rated capacity of your hitch receiver.
This 5/8" diameter pin fits 2" and 2-1/2" square receiver hitches. Includes retaining clip. Rubberized, plastic-coated ends give you a secure grip for easy installation and removal. Zinc finish resists corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip inserts into end of pin to hold pin in place Sturdy steel construction Corrosion-resistant zinc-plated finish Pin and clip have a rubberized, plastic-coated grip for easy installation and removal Specs: Application: 2" x2" and 2-1/2" x2-1/2" trailer hitch receivers Pin diameter: 5/8" Usable length (span): 3-3/16" Overall length: 5-1/2"
This grooved, 5/8" diameter pin fits 2" and 2-1/2" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Grooved end enables easy installation and removal of included clip Sturdy steel construction Corrosion-resistant zinc-plated finish Specs: Application: 2" x2" and 2-1/2" x2-1/2" trailer hitch receivers Pin diameter: 5/8" Usable length (span): 3"
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…
Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…
Hi Glen, It's good to hear from you again! If you're wanting to switch to the Roadmaster Comfort Ride system with the leaf spring, equalizer, and shock absorber upgrades, I recommend using the Roadmaster Comfort Ride Leaf Spring Suspension…
Hello Vernon, Great question. I actually reached out to Coleman-Mach to make sure. Based on what they told me, if your Keystone Alpine 3220RL was equipped with the In-Command system and factory prepped for a third AC, the Coleman-Mach Mach-C Everest…
Hey Ryan! The SuperSprings Custom Suspension Stabilizer and Sway-Control Kit #SSA24 will fit your 2023 Ram 3500. It is compatible with SRW and DRW trucks so it doesn't matter either way. It is also compatible on models with and without factory…
Hey Jerry, thanks for reaching out. The short answer is yes, probably but it really depends on your exact setup. When you slide the Companion back, you gain cab clearance but lose space at the tailgate, and with a MorRyde pin box being a bit bulkier,…
Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…
Hey Greg, welcome back! Since we know your 2023 Montana High Country has a Lippert 1116 style pin box the correct Sidewinder replacement you'd need is the part #RP77FR. The correct wedge to use this with your B and W fifth wheel hitch would be…
Hello Rickey, thanks for reaching out. Yes, the Gen-Y Hitch Gooseneck Trailer Hitch #GY83XR is the gen 2. It's the exact Gen-Y part #GH-21014 you are looking for. It looks like we haven't updated our pictures yet but I can assure you what we…
Hey Jerry! The TorkLift Tie-Downs like the #TL83DR you were looking at are a custom fit so you won't have to drill into your frame. These are the Talon, which is the upgraded aluminum version, and will fit your Ram assuming you have no running…
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 1-1/4" hitch receiver. Includes retaining clip. Usable length is 2-1/2". Black e-coat resists corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip inserts into end of pin to hold pin in place Carbon steel construction with black e-coat is durable and corrosion resistant Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Pin diameter: 1/2" Usable length (span): 2-1/2" Lifetime limited warranty
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2" or 2-1/2" hitch receiver. Includes retaining clip.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip inserts into end of pin to hold pin in place Sturdy steel construction Corrosion-resistant zinc-plated finish Specs: Application: 2" x2" and 2-1/2" x2-1/2" trailer hitch receivers Pin diameter: 5/8" Usable length (span): 3-3/16"
This hitch lock fits all 2", 2-1/2", and 3" receivers with a pin hole diameter of 5/8". It has a dust cap to block out dirt and moisture. Its stainless steel construction makes it extra rustproof. ... Features: Locks your ball mount or hitch accessory into your receiver Fits 2", 2-1/2" and 3" receivers Dust cap blocks out dirt and moisture Includes 2 keys for pick-resistant tubular lock cylinder Made of stainless steel Specs: Application: most 2", 2-1/2" and 3" hitch receivers Diameter: 5/8" Overall length: 5-7/8" inside pin length (span): 3-7/16"
2" x2" Receiver mount fits your budget with bolt-together design Adjustable handle positions Used for truck winches up to 12K with 10 x 4.5" mounting bolt patterns Will not fit large body truck winches or Alpha Series Capacity is based on capacity of vehicle receiver
This 5/8" diameter pin fits 2" and 2-1/2" hitches and has a 4" usable length. The zinc-plated finish offers corrosion resistance. Retaining clip is included.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Grooved end enables easy installation and removal of included clip Corrosion-resistant zinc-plated finish Specs: Application: 2" x2" and 2-1/2" x2-1/2" trailer hitch receivers Pin diameter: 5/8" Usable length (span): 4" Limited lifetime warranty
Extend your trailer hitch receiver opening and add a sturdy step to the rear of your vehicle at the same time. This extension lets you mount a bike rack without having to remove your spare tire, and it gives your trailer more clearance during turns.Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Provides sturdy step at rear of vehicle Get into and out of truck bed or cargo area with ease Access your boat or equipment without having to climb all over your trailer frame Shank is a solid steel construction Resists corrosion with black powder coat finish Requires hitch pin and clip or hitch lock (sold separately) Made in the USA Specs: Application: 2" x2" trailer hitch receivers Hitch receiver size: 2" x2" Gross towing weight: 3,500 lbs Towing weight with weight distribution: 7,000 lbs Tongue weight: 350 lbs Tongue weight with weight distribution: 700 lbs Overall length: 19" Distance from center of hitch pin hole to front of the receiver opening: 16-1/2" Distance between center of pin hole to center of pin hole: 14" Step platform dimensions: 17" wide x 6-1/2" deep Note: Using this hitch extension will reduce your hitch's weight capacity by one third.
Extend your trailer hitch receiver opening and add a sturdy step to the rear of your vehicle at the same time. This extension lets you mount a bike rack without having to remove your spare tire, and it gives your trailer more clearance during turns.Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Provides sturdy step at rear of vehicle Get into and out of truck bed or cargo area with ease Access your boat or equipment without having to climb all over your trailer frame Shank is a solid steel construction Resists corrosion with black powder coat finish Requires hitch pin and clip or hitch lock (sold separately) Made in the USA Specs: Application: 2" x2" trailer hitch receivers Hitch receiver size: 2" x2" Gross towing weight: 3,500 lbs Towing weight with weight distribution: 7,000 lbs Tongue weight: 350 lbs Tongue weight with weight distribution: 700 lbs Distance from center of hitch pin hole to center of hitch pin hole: 18" Step platform dimensions: 17" wide x 6-1/2" deep Overall length: 23" Notes: Using this hitch extension will reduce your hitch's weight capacity by one third.
This 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip inserts into end of pin to hold pin in place Sturdy steel construction Corrosion-resistant zinc-plated finish Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Pin diameter: 1/2" Usable length (span): 2"
1/2" Diameter pin with clip fits 1-1/4" x 1-1/4" receiver hitches. Rubberized, plastic-coated ends give you a secure grip for easy installation and removal.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip inserts into end of pin to hold pin in place Pin and clip have rubberized, plastic-coated grip for easy installation and removal Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Pin diameter: 1/2" Usable length (span): 2" Overall length: 3-1/2"
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2-1/2" or 3" hitch receiver. Included twist clip secures pin and is easy to install and remove. Usable length is 4". Zinc finish resists corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip twists into end of pin to secure pin in place Easy to install and remove with unique design - just twist the clip Sturdy steel construction Zinc finish resists corrosion Made in the USA Specs: Application: 2-1/2" x2-1/2" and 3" x 3" trailer hitch receivers Pin diameter: 5/8" Usable length (span): 4" Overall length: 5-5/8" Weight capacity: 21,000 lbs
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2" hitch receiver. Included twist clip secures pin and is easy to install and remove. Usable length is 3-1/2". Zinc finish resists corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip twists into end of pin to secure pin in place Easy to install and remove with unique design - just twist the clip Sturdy steel construction Zinc finish resists corrosion Made in the USA Specs: Application: 2" x2" trailer hitch receivers Pin diameter: 5/8" Usable length (span): 3-1/2" Overall length: 4-3/4"
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2" hitch receiver. Included twist clip secures pin and is easy to install and remove. Usable length is 4-1/2". Zinc finish resists corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip twists into end of pin to secure pin in place Easy to install and remove with unique design - just twist the clip Sturdy steel construction Zinc finish resists corrosion Made in the USA Specs: Application: 2" x2" trailer hitch receivers Pin diameter: 3/4" Usable length (span): 4-1/2"
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.Features: Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle Hidden cross tube provides a clean, from-the-factory look Easy, bolt-on installation - no drilling or welding required Sturdy, lightweight alloy construction Alloy is made of recycled materials and combines aluminum, steel, and stainless steel Black powder coat finish offers superior rust protection Meets SAE J684 towing safety regulations Made in the USA Specs: Receiver opening: 2" x2" Maximum gross trailer weight : 2,000 lbs Maximum tongue weight : 300 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Cross Tube for a Clean, Factory Look The EcoHitch Hidden trailer hitch is designed to be as inconspicuous as possible.
This solid steel hitch pin lets you secure your ball mount, bike rack, cargo carrier or other accessory to your 2-1/2" or 3" trailer hitch receiver. Zinc finish guards against corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Included clip inserts into end of pin to hold pin in place Solid steel construction offers superior strength and durability Zinc-plated finish resists corrosion Specs: Application: 2-1/2" x2-1/2" and 3" x 3" trailer hitch receivers Pin diameter: 5/8" Useable length (span): 4"
This grooved, 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.Features: Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver Grooved end enables easy installation and removal of included clip Sturdy steel construction Corrosion-resistant zinc-plated finish Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Pin diameter: 1/2" Usable length (span): 2-1/4"
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.Features: Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle Hidden cross tube provides a clean, from-the-factory look Easy, bolt-on installation - no drilling or welding required Sturdy, lightweight alloy construction Alloy is made of recycled materials and combines aluminum, steel, and stainless steel Black powder coat finish offers superior rust protection Meets SAE J684 towing safety regulations Made in the USA Specs: Receiver opening: 2" x2" Maximum gross trailer weight : 2,000 lbs Maximum tongue weight : 300 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Cross Tube for a Clean, Factory Look The EcoHitch Hidden trailer hitch is designed to be as inconspicuous as possible.
Filters
