Draw-Tite Pin and Clip for 2" Hitches - 5/8" Diameter x 2-3/4" Span

Part Number: DT29KV

In Stock

$5.17

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

draw-tite hitch pins and clips standard pin fits 2 inch clip for hitches - 5/8 diameter x 2-3/4 span

Show All (1) Product Images

Show Fewer Product Images

Need help with installation?

Locate installers near me

This grooved, 5/8" diameter pin fits 2" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion. 1-800-940-8924 to order Draw-Tite hitch pins and clips part number DT29KV or order online at etrailer.com. Free expert support on all Draw-Tite products. Great prices and Fastest Shipping for Draw-Tite Pin and Clip for 2" Hitches - 5/8" Diameter x 2-3/4" Span. Hitch Pins and Clips reviews from real customers.

All Info
Reviews (897)
Q & A (0)
Related Parts
Photos

Draw-Tite Hitch Pins and Clips - DT29KV

This grooved, 5/8" diameter pin fits 2" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.

Features:

Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver
Grooved end enables easy installation and removal of included clip
Sturdy steel construction
Corrosion-resistant zinc-plated finish

Specs:

Application: 2" x 2" trailer hitch receivers
Pin diameter: 5/8"
Usable length (span): 2-3/4"

63240 Draw-Tite Pin and Clip for 2" Class III and IV Trailer Hitch Receivers - Zinc

4.7

897 reviews

5 Stars		(756)
4 Stars		(89)
3 Stars		(33)
2 Stars		(5)
1 Star		(14)

by: Doug 05/30/2026

by: Tim F. 04/22/2017

This is actually the second one of these I've installed. I helped a friend put one on his 06 Outback and it was really easy. So when I needed one for my 05 Outback I knew where to buy one.

Super-simple installation and looks good too.

Click to Enlarge

Tim F. One Year Later

4/24/2018

They are all working just fine still.

by: David 10/08/2019

The hitch adapter and 90 degree mount solved my desire to mount my electric wench on my auto trailer replacing the manual wench. See photo.

The 2" sleeve would not come out of the existing 2" receiver so I used the hitch adapter to make the transition. The etrailer experts correctly told me there would be some play in this joint. However, it works here (as this is not for towing).

I also used the 90 degree mount upside down (also not an approved application). But again no towing is involved. I did need to drill a new hole in the receiver.

Click to Enlarge

by: Anna 05/19/2018

After balking at the cost to have an auto-shop add a trailer to our Toyota Highlander, we found etrailer.com and decided to take a chance. The "how to" videos factored considerably in our decision to buy ... they made it look so easy! And surprise! It really -WAS- that easy. We used standard block-type ramps (the kind you can buy for $40 ) to get the SUV up off the ground high enough to get underneath to do the work. Everything came off as easy as it was showed in the videos. Other than the fact this bar is a heavy so we had our teen daughter help hold it steady while we bolted it into place (i.e., get help for when you go to lift it), it went super smooth. Thanks for saving us $280 over the cost the car dealer quoted us! P.S. - be sure to watch the linked videos so you get the right trailer lighting attachment and ball hitch for your new hitch.

Anna One Year Later

5/20/2019

We are very happy with our trailer hitch, and all the accoutrements that we purchased with it. Your videos were enormously helpful, the hitch went on easily with a bit of help from our teenage daughter to lift it up into place, and we recommend your business to friends when they express an interest in getting a camper.

by: Stan 10/24/2018

E-Trailer fits like a glove and is so easy to install. Thanks

Click to Enlarge

by: Doug F. 10/09/2017

Purchased with a Draw-Tite hitch that has the bracket welded to the cross member. No sweat to install onto hitch.

Remember to mount the bracket to the hitch before installing hitch. Also, the vertical tab with the slot must face the rear of the truck to accept the plug from the wiring harness.

Doug F. One Year Later

10/9/2018

Working fine.

by: David Q. 09/15/2016 One Year Later

Pin and Clip For Class I and II Trailer Hitch Receiver Hitch - PC2 is the quake and safe easiest way to connect your trailer hitch to your vecicle.

David Q. One Year Later

9/15/2017

The pin and clip make installing the hitch easy and safe to use.The pin and clip make installing the hitch easy and safe to use.

by: Wade 05/13/2014

Great Video guides on how to install everything. Made installation a breeze. Super fast shipping was shipped day I ordered it! Got everything and well boxed everything in good condition. Great company to work with I usually dont leave feedback but these guys did everything right!. Thanks etrailer!

Wade One Year Later

5/18/2015

Great stuff and everything works fine. FYI you guys do a great job and your help videos really helped with me installing the hitch. God bless!

by: Michael 09/05/2018

Pulling the pin on my new Tacoma was a pain in the rear with the old pin from a 2005 Tacoma. The new truck has an extra lip welded on the receiver. So I got this one, out of the box I thought it was exactly what the old one was. Not so, just a bit longer so the pin slides right in ??
Thanks

Heather A.

9/13/2018

The Oem hitches on the 2005 Toyota Tacomas have extra width around the receiver and will need a hitch pin that is made for a 3 inch hitch. I recommend Curt part # C21506 Hitch Pin and Clip. This hitch pin and clip is 4 13/16 inches long.

Helpful Links

Hitch-Pins-and-Clips/Curt/C21506.html

by: Joe G. 04/30/2015

Does it's function, but did not seem secure. It could be tampered with easily. Replace it with a locking pin.

Joe G. One Year Later

4/29/2016

Everything works fine

by: jd 11/21/2013

Extremely poor design. Do NOT purchase this junk! Go to a hardware store and get a real one. This pin has no hole for a cotter pin. The weak spring clip is unreliable at best. I would not take a chance on a clip design like this.

Jd One Year Later

11/22/2014

I do not use this pin. Instead, I use a pin with a cotter pin hole in it.

by: Janet R. 06/23/2017 One Year Later

We got this so we could open our tailgate without having to unhitch the trailer. It works great! Product is good, service was fast... it made our trip to Alaska much happier (our dog needs the tailgate lowered so she can jump in and out for potty breaks). We still need to have the truck and trailer pretty much straight in line with each other... if there is too much angle left or right, we can't fully lower the tailgate. We drive a 2015 Ford F-150.

by: Pops 09/08/2016

When you Google "customer service" etrailer has to be first in line! They care and they want it right!
In addition, my new hitch sleeve insert/cover is the highest quality I have seen. Talk about rock solid!
etrailer is the first place I am going to go for all of my trailer towing needs. Top of line people, outstanding products and very competitive pricing. I'm all in!

by: Videos are spot on! 08/12/2013

Purchased Hidden Hitch Class 3, 2" hitch for my 2007 Honda CRV along with wiring harness and ball mount. Not the handiest person in the world but after installing this hitch, my handy-ego has been inflated. The videos on the website are spot on and are a huge resource for installation. Support during the sale and after were much appreciated. This is one of my top five e-commerce experiences. Well done etrailer.com!

by: Chris B. 08/28/2019

The pin and clip were exactly what I was looking for. The quality and finish of the product seem to be top notch. I would not hesitate to recommend this product.

Chris B. One Year Later

8/29/2020

The product hasnt disappointed. Its done its job even when I managed to damage the hitch cover by scraping it on the ground rough, rough road.

by: Ian 07/07/2022

Ordered because my C3 hitch fits a 5/8" pin, but my moto carrier is drilled for (almost nearly but not quite) 3/4" and I wanted to reduce the potential for sway. Pre-ordering questions over chat were helpful, order was seamless and delivered quickly (for Canada), quality seems solid and fit and finish are top notch (in particular the sleeve over the 5/8" pin). Unfortunately it did not fit my application, but that was on me, not the fault of etrailer. I'll hang onto it as I'm sure I'll use it at some point.

by: Lorie S. 04/01/2016 One Year Later

The trailer hitch was easy to install and works great. The etrailer customer service reps really know their stuff. I would recommend etrailer to anyone interested in a trailer hitch and associated equipment.

by: Don F. 08/17/2017

All the parts ordered are of great quality and fit properly. Packaging needs work. The original box was ripped open and had been taped back together by the shipper(UPS). The hitch was still secure but the tow bar was loose and the pin and clip were missing. etrailer sent another pin and clip.
In the future possibly adding some fiber tape would lessen the chance of boxes being mangled.

by: JR 07/10/2014

What can I say? The pin fits in the hole, and the clip fits on the pin. Can't ask for much more than that!

Jr One Year Later

7/20/2015

They are all working great, thanks. No complaints.

by: John B. 06/14/2017

etrailer is a very great company to deal with. The video's they supply step by step on how to put the hitch on your own vehicle are very helpful. Plus the video uses your own model vehicle & year model. The price was very fair. I would recommend this company to anyone needing a hitch.

by: Brent 10/02/2019

Customer Support was excellent. Products fit as good as factory and a whole lot less expensive. Installed in a couple of hours with a little help from a friend. The hitch is pretty beefy and I needed a little help holding in place. Other than that everything bolted right up. Nice heavy duty bolts and thick wafer washers to insure it won’t come lose. The hardest part was cutting the plastic factory shielding underneath around the hitch. Great product.

by: Casey R. 02/02/2014

Great basic pin and clip! may upgrade to locking one later.

Casey R. One Year Later

3/3/2015

Thanks, Patrick every thing was great and working fine. Charles

by: Jim B. Falmouth Maine 09/09/2016

To Whom it May Concern:
I highly recommend etrailer.com com. I ordered a trailer hitch and bike rack by phone. The sales agent was professional, competent, helpful and friendly. The prices of the products are fair and the delivery was timely and arrived in good condition. It is rare to have a purchase experience of the level of high quality that I experienced with etrailer.com. I am highly recommending this company to others, based on my first experience with them, and I would not hesitate to purchase from them again. 4 stars out of 4. Thank you. Jim B., Falmouth Maine.

by: Works A 12/30/2019 One Year Later

Works as expected, i purchased this for ise with a winch block for receiver tube to be able to do multiple line pulls using pullies.

I have a locking pin when using for towing.

by: Mack-Clauser 08/19/2014

This is my second purchase from eTrailer.com. Their web site is easy to navigate and you are able to order what you need even if you don't know the first thing about trailer hitches. Their deliveries are always fast and accurate as well. Our next vehicle is just about ready for towing. Thanks eTrailer.

897

true

Show More Reviews

See what our Experts say about this Draw-Tite Hitch Pins and Clips

Do you have a question about this Hitch Pins and Clip?

Info for this part was:

Edited by:

Lindsey S

Updated by:

Wilson B

Updated by:

Katherine B

Written by:

Ryan F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.