Result: 2 prong plug

For a 2-wire right-angle pigtail for your Optronics trailer lights you can use part #A46P36B which is 36-inches long. This can be cut to the 18-inch length if necessary. This will require ring terminal #DW05737-1. We also have shorter 10-inch length…

The Optronics LED Trailer Clearance or Side Marker Light #MCL66RB and its amber counterpart #MCL66AB are both surface mount installations so you would just need to use the appropriate screws for whatever material you'll be mounting them too. I…

For an LED replacement that is nearly identical to the Wesbar 105826 light you can use #STL36RB for the right side and #STL37RB for the left side. There are also versions that have a plug instead of just bare wires. For the right side use #STL36RPG…

I recommend replacing your Tail Lights with the Drivers #STL37RPG and Passengers #STL36RPG lights as the Wesbar Lights and lenses are obsolete. The Optronics lights above will both use the same Tail Light Lens #A39RB if either side were to become…

I looked up your EZ Loader part number and it appears to be the same design as the part #AL91AB which for the matching grommet you'd then need the part #A91GB. You'll also need the wiring harness #A46PB.

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

We can get you set up to add back up lights and a 7-way to your boat trailer, and I'll go over what you'll need. Let's start with the back up lights, and for your boat trailer you'll want submersible lights like you said, the GloLight…

In order to splice into the wire and add yellow side marker lights like the #MCL13A2B I recommend using the Self-Stripping Connector with Waterproof Sealant #SWC501746-1. This is designed to make a quick connection without cutting or stripping, and…

In terms of capability the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX89FR is a good replacement option. The problem is the design of your old TDE LP7000 which was installed inside the tongue…

I'm guessing it is approximately 3-3/8" across if you measured it. Unfortunately there are no options that will slide in because it won't line up correctly, and everything is designed to fit a 3" tongue so it is too wide to mount an…

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

To be on the safe size, I recommend going with a 13 inch bracket #CE10002G-4 at the back of the trailer and an 11 inch bracket with #CE10003G at the front. A nice feature on these brackets is that they will each actually have as much as 3-3/4 inches…