Salt Spreaders Specs:
Features:
This gravity-fed tailgate spreader has a powered spinner to help de-ice driveways and small strip mall parking lots. 9" Diameter spinner casts rock salt up to 24'. Tilt hopper down to access the back of your Jeep, SUV, or truck.
Tech Tip:
Hitch tongue weight will determine amount of salt able to be loaded into spreader, based on spreader weight and weight of salt combined.
More Information >Videos
for Salt Spreaders
Help Articles
for Salt Spreaders
Expert Answers
for Salt Spreaders
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hey John, yes the Tekonsha brake controller install harness part #3050-P is correct for your 2023 Nissan Frontier and would be what you would need to install the Prodigy P2 part #90885. This harness has one end that was designed to fit your truck…
view full answer...There is indeed a trailer hitch receiver that fits your 2024 Subaru Crosstrek Wilderness, from Curt, with the correct part number being the following: - Curt Trailer Hitch Receiver #C13382 I verified this fit with the manufacturer for you, and it…
view full answer...I have included a picture that shows what Curt hitch #C13140 looks like when installed on a BMW X1. The picture is from the instructions which I have also linked for you. As you can see the receiver opening is the only part visible beneath the rear…
view full answer...Yes, it will but you'll lose some functionality by the 2" receiver. All of the hitches available for the 2023 Honda Passport block the sensors by the 2" receiver somewhat. What you will need to do is kick to the left and right of the…
view full answer...Since your 2022 Mercedes-Benz Sprinter 2500 did not come with the factory tow package you may not have a connector for the brake controller under the seat or under your dash. I have linked an installation video for the Redarc #RED44FR at the bottom…
view full answer...To add a hitch to your 2024 Mercedes-Benz Sprinter 2500, I recommend the etrailer item #e82TR. This hitch is custom fit and bolts to your Sprinter with included hardware. It fits both the 144" and 170" wheelbase models so long as you have…
view full answer...There is no adapter available that will go from a 7-Way vehicle side connector to a 6-Way square Jayco connector. You will need to make one using the follow parts: 7-Way trailer connector #H20042 6-Pole Square Trailer Wiring Connector Kit, #37995…
view full answer...I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…
view full answer...Just a single difference exists between the Curt and etrailer trailer hitches for your 2024 Mercedes Sprinter 2500 with a factory step bumper, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black…
view full answer...The HitchMate TireStep #HE4040 does not have any additional parts intended to protect your vehicle's rim. However, we haven't had any customers experience this issue using it. Another option is the Powerbuilt Adjustable Tire Step #ALL647596…
view full answer...The only solution to reducing wind noise on a roof rack, like your Rhino-Rack Vortex Aero Crossbars 54" #RRVA137B-2, is to install a wind fairing / deflector. To determine which size to get, measure the usable crossbar space between the…
view full answer...Filter Products (2)