Result: triangular equalizer

We meet again. The CE Smith Triangular Equalizer # CES86WR has nylon bushings. Pretty much all of the standard equalizer we carry come with nylon bushings pre-inserted. | does this equalizer...

You can substitute the Road Armor Shock Absorbing Equalizer Kit # LC696740 for your Triangular Equalizer # TREQ310 but you will need to get shorter shackle straps as well. | Could this kit...

This may raise your suspension up to 1" as you have the flat equalizer rather than a triangular equalizer. The Shackle Strap - 3-1/8" Long # TRSL313 can be used to replace the straps that are included to get your trailer closer to the current height. |

In order to confirm fit of the Triangular Equalizer for 1-3/4" Double-Eye Springs part # TREQ310 you need to verify the spacing between the lowermost holes on the equalizer either matches what is currently installed on the trailer or will match when new shackles straps are also installed to make up the difference. |

We do have all the items you need, however the TruRyde Triangular Equalizer # TREQ310 that you referenced is not available in a complete suspension kit. | do you have a kit like Item # K71-359-00 but with...

Yes, we do have more of a kit that includes an equalizer with the same specs as the Triangular Equalizer for 1-3/4" Double-Eye Springs # TREQ310. | Im pricing out a job here on a trailer it...

| Since the equalizers in the Dexter Heavy-Duty Suspension Kit # K71-359-00 you referenced don't match I recommend using this kit and then just purchasing 2 of the Triangular Equalizer # TREQ310 which has measurements that are very close to what you have (see attachment). |

I have listed the parts you will need below with the correct quantity for all the suspension on your tandem axle trailer. Triangular Equalizer # TREQ310 Qty 2 Shackle Strap # TRSL313 QTY 8 Shackle Bolt # TRFA73Z916DLNZ QTY 12 Equalizer Bolt # 7-182-6-112 QTY 2 If your Nylon Bushings # TRBU11566 in your springs are worn or damaged those can be replaced when you install the new bolts. |

You can use the Equa-Flex Cushioned Equalizers # LC279687 as a replacement for your current equalizers, which are equivalent to the Triangular Equalizer # TREQ310 but you will need to replace your shackle straps as well. |

I do have a solution for you but unfortunately we don't have a complete suspension kit that has all of the parts the Kit # K71-359-00 has but with a larger equalizer. Instead I recommend using the Never Fail Tandem Axle Suspension Upgrade Hardware Kit # LC281285 along with the Triangular Equalizer # TREQ310 which has a 4" height and a 6-1/16" width. |

The bushings in the Triangular Equalizer # TREQ310 that you referenced are nylon. | Are the bushings used in this equalizer Bronze and if so, can a wet bolt be used in the center hanger, as in the lower holes...

You can replace the TruRyde Triangular Equalizer # TREQ310 with the Equa-Flex Cushioned Equalizers # LC279688, however there are a few things that you should take note of. | Can the Equa-Flex...

Randy, I have a couple routes you can go since the grease zerk on the Dexter Heavy-Duty Suspension Kit # K71-448-00 is not going to fit inside your hanger. We do have the Triangular Equalizer # TREQ310 but this comes with nylon inserts so you would need to swap them for Bronze # D014-077-00 if you wanted to have Wet Bolts # MR46ZR. |

The correct replacement for a Dexter 13-10 Equalizer is the Triangular Equalizer part # TREQ310, not the Curved Equalizer part # TREQE1. | can I replace a eq 310 with a tsw...

There are replacement equalizers (the triangular pieces), but I need more information on the sizes to give you a specific replacement option. | My toy hauler needs new shackles. 2005 weekend warrior FS 2200....

| The 13-10 equalizer is equivalent to the Triangular Equalizer for 1-3/4" Double-Eye Springs - 6-1/16" Long - 9/16" Center Hole # TREQ310. | Hello, I was looking at cushioned equalizers...

So based on the measurements you mentioned, the equalizer you have now is likely the Triangular Equalizer # TREQ310, and for that the best option for an equalizer upgrade kit is definitely the Road Armor Shock Absorbing Equalizer Kit # LC696740. |

But for a regular equalizer what you would need is Triangular Equalizer for 1-3/4" Double-Eye Springs - 6-1/16" Long - 9/16" Center Hole Item # TREQ310. | I have a equalizer that measures 6...

Assuming you currently have 2-1/4" or 2-5/8" shackle straps, you should be able to replace your 7-3/4" Long # TREQE1 equalizer with the 6-1/16" Long Triangular Equalizer # TREQ310 with longer shackle straps. |

However, I noticed towards the end of the project the old equalizer was triangular and the replacement was curved. | We recently found the shackle plates on our 2006 Zinger had failed. I went ahead and purchased...

2020 Cherokee Alpha Wolf with 6inch drop center bolts of suspension arm. Do you have e-z flez to fit my TT | The correct Dexter Axle E-Z Flex suspension system for your 2020 Cherokee Alpha Wolf is part # K71-652-00. The equalizer you have on...

Your Triangular Equalizer # TREQ310 is 6-1/6" on bolt hole center, so you have the correct size for your toy hauler. | I would like to upgrade my factory equalizer FQ-310 I purchased Dexter EZ flex K71-652-00 Is...

My outer hangers are triangular is shape and the adapter plate look like they need to bend over the edges of the hanger. | When I look at the picture of the Correct Track adapter plate and how it bolts up to the existing hanger...

To replace your original equalizers, I recommend using the TruRyde Triangular Equalizer # TREQ310. | My old equalizer measures 6inch on the hole centers with a over all height of 4 1/2inch...