Result: thpxl

Hey Mike, The #IR29FR lock kit is not compatible to work with the B&W Pintle Hitch that you have. The pin diameters are different sizes and would not fit. The only kit we have that is confirmed to fit the B&W Pintle Hitch is the InfiniteRule…

The Replacement 42" Cable for Breakaway Switch from Bright Way Group, #3802350, will fit most models of ESCO break away switches. If you don't want to take a chance on it not fitting, I would instead recommend replacing the switch with part…

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

I can only go by what the owner's manual for your 2014 Chevy Express Van lists and on the online version I was able to pull up it shows the following fuse locations for towing circuits inside the under-hood fuse block: #3 position - Trailer Right…

You are correct, there are 4 electric over hydraulic braking systems, from 3 manufacturers, that can be used to eliminate the air over hydraulic actuator on your M200A1 trailer. These systems all require a breakaway system to meet DOT safety…

In order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll…

Weight distribution (WD) systems actually take on the weight of any cargo behind the rear axle of the tow vehicle (your 2010 Toyota Tundra) as well as the tongue weight (TW) of the loaded trailer. This is why you are finding that your WD system…

Hey Jake, that is a good question. I did some research to figure out what you're referring to, and I came to the conclusion that sometimes Hyundai has duplicates of these factory plugs (one on the driver side, and one on the passenger side). The…

Heavy duty ramp springs #RS16933RH and #RS16933LH install on the hinge of the ramp. I have included a picture of what this looks like for you. Not all trailers are exactly the same but this should give you a general idea of how the springs install.

From what I could find, the MasterPro Hub PT581750 you have fits a Dexter #84 Spindle. This is one of the most common spindle available for a 3,500 pound axle, so there are definitely options available for replacements. With that being said, the…

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

I spoke to Tekonsha about finding the exact location for the brake controller on your truck and they told me that for your 2019 Dodge Ram 1500 "the connector is behind the area in the attached picture and from what we’ve been told you can reach…