Result: rotor

The bolt holes on the Demco coupler #DM15945 are 3" apart on center. I have included a drawing below that shows the dimensions. You can use a 1/2" grade 5 or higher bolt to attach to the tongue of your trailer.

I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.

A bearing with a 0.75" inner diameter is LM11949 and a bearing with a 1.25" inner diameter is LM67048, and we don't have a hub with a 6 on 5-1/2" bolt pattern. For a hub with a LM11949 outer bearing and LM67048 inner bearing, the…

The best option to replace your Tie Down Engineering Model LP80 actuator is the Dexter DX7.5 Drop-N-Go Brake Actuator item #099-175-20 you were looking at. This actuator has a 7,500 lbs capacity and is rated for disc brakes. It fits a 2" hitch…

The Tie Down Engineering (TDE) Brake Actuator 48980 also known as the 80LP/85LP is a 8,000 lb or 8,500 lb disc brake actuator with 2" coupler. In order to replace this, the best option we have is the Demco Hydraulic Brake Actuator part…

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

It would appear your Trition UT16 utility trailer will have axles using the standard #84 spindle dimensions. You will want to verify this is what you have by disassembling one of the hubs and measuring the spindle, see image below. The spindle will…

Usually when we see leaking on a brass fitting like the tee from the Kodiak Hydraulic Brake Line Kit #18SI-BLKIT it is due to overtightening. Start by hand tightening, then take it around 2-3 rotations with a wrench. After that check for leaks and…

While we currently do not have a video showing the replacement process for the Shock #T1242600 on a Dexter Model 10 Brake Actuator #T2478100 it does appear all you need to remove is the 2 large pins along with the top roller to slide the Inner Slide…

To determine if the Replacement Shock for Titan Model 6 and 10 Brake Actuators, part #T1242600 will work to replace your Gabriel number 610712 (T2032) shock, you will need to verify a few quick measurements. Part #T1242600 will work as a replacement…

For a disc brake model with an electric reverse lockout solenoid you can use #099-175-20. This would be a great replacement solution for the model 70 you have on your trailer.

No, the Caliper Rebuild Kit for 6,000-lb to 8,000-lb Dexter Disc Brakes #K71-670-00 will not work with your Kodiak 225 Calipers, you'd need to use the Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes #KDBC225KIT…