Search: mirrors   >   Trailer Hitch Ball   >  

For a trailer that has an angle iron frame like what you have what I would recommend is a system like the Reese Steadi-Flex part #RP66558 you referenced and have the outer brackets welded to the frame of the trailer since there isn't a clamp…

For your 2019 Toyota Tacoma I recommend the K-Source Tow Mirrors part #KS3891-2 which installs easily by grabbing the lip on the mirror housing of your truck and then tightens down with rubber straps. This mirror is very stable and easy to install…

We have really great universal style tow mirrors that fit your 2006 Ford Expedition like the K-Source part #KS3891-2 which we recommend highly but custom fit mirrors that were designed to fit a F-150 would not work on your Expedition. I attached an…

No, Lippert does not sell or make available only the top portion of the Wi-Fi and Hotspot Kit for Lippert OneControl Hotspot Prepped RVs #LC35UD. If part of it sheared off you do need to purchase a whole kit.

Yes, we have the Curt tow bar wiring kit part #C96JR that is a confirmed fit for your 24 Wrangler. This installs by plugging inline with your taillight connectors which means it does not need any splicing.

Hey Miles, so the Curt tow bar lighting kit part #C96JR that you referenced installs by plugging inline with the taillight connectors of the vehicle so it's not going to interfere with any trailer wiring.

I checked with Camco, and the clearances are the same; you will need 4 inches of clearance on the sides, 18 inches of clearance on top, and 30 inches of clearance in the front for the Camco Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs…

You simply measure between the tires about an inch off the ground to determine what Fastway chocks are the best fit for your application. We have the Fastway ONEstep Wheel Chock for Tandem-Axle Trailers and RVs - 16" to 24" Long…

What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.

You have a really interesting suspension setup on your trailer. I don't know what the width of the channel is that your springs attach to but to go to a double leaf will require using a hanger kit like the part #APS4 that you referenced. If…

Everyone I know who has installed a RAS system on their truck like the #RAS94FR went with the highest setting and found that it gave them the best ride quality, support, and handling. I would try that first since we know it works so well for…

The 1,000 pound capacity SumoSprings Solo Custom Helper Springs #SSR-117-40 for 4 Wheel Drive and #SSR-116-40 for 2 Wheel Drive referenced in your question will offer a smoother empty ride in your 2016 Ford F-150 than a higher rated alternative…