Search: hollywood bike rack   >  

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

With your 2023 Kia Telluride SX Prestige X-Line having LED tail lights you will need the Curt Powered Tail Light Converter #C59236. The Harness #C93FV you found is only for use on models with incandescent tail lights. The Harness #C59236 will require…

Yes, it will. It looks like the rear rack on your Aventon Pace 500 step through e-bike stops right around the 11 o'clock position. The pivoting arms on the Saris SuperClamp HD Bike Rack item #SAR44VR will go low enough on your wheel for the…

To add a hitch to your 2023 Kia Telluride, I recommend the Curt Trailer Hitch item #C13420. This hitch is custom fit and bolts to your Kia with included hardware. We recently installed one of these hitches and the best part about it is that the…

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

As long as the fender is tightly installed on the bike and the hook is attached to the fender as close as possible to the top tube of the bike, the #BA22B should carry the town bike you mentioned with no problem whatsoever. I spoke with one of my…

The Saris SuperClamp HD Bike Rack for 2 Bikes #SAR44VR can hold two bikes weighing up to 60 lbs. per bike and a maximum tire width of 4". This rack is also a wheel mount style which is typically the style needed for step though bikes. The Saris…

The maximum wheelbase of a bike that will fit the Inno Tire Hold 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Tilting #INH120 is 48 inches.

First the #TH69TX that the mentioned is for 4 bikes. The 2 bike version of this Thule T2 Pro XTR is the #TH83JV. You are correct, bikes that have fenders would not fit well on the Thule T2, #TH83JV or the #TH69TX. . Since you have such heavy bikes I…

Wheel mount bike racks like the Yakima #Y02443-2 HoldUp don't work well with fenders. In order to securely hold the bike, the bike retaining hook needs to grasp the tires directly, right in front of the front wheel fork. A fender prevents direct…

I was able to take a measurement of the Curt Bike Rack for 2 Electric Bikes - 2" Hitches - Wheel Mount, part #C89JR. I would feel comfortable carrying bikes with wheelbases up to 50". I have included a video review below.