Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 600 lbs TW

See what our Experts say about this Equal-i-zer Accessories and Parts

• Availability of 600 lb Tongue Weight Spring Bars for Equal-I-Zer Weight Distribution System
  Yes, you can swap out your spring bars to the lighter duty part # EQ90-01-0699. These bars have a tongue weight range of up to 600 lbs. We do not have any front hitches at this time for a 2014 Express though.
  view full answer...
• Equal-i-Zer Spring Bars that Would Work with 2023 Airstream Basecamp 20X
  I checked and the GVWR of the 2023 Airstream Basecamp 20X is 4,300 lbs. So based on the Equal-i-zer spring bars part # EQ90-01-0699 would be correct as they are rated for up to 600 lbs.
  view full answer...
• Are 1000 lb Rated Equal-i-zer Spring Bars Interchangeable with 600 lb Bars
  I am not sure what you mean by too much spring action. If you are wanting to downgrade the system by using lower rated spring bars, you would do so because the current bars are NOT providing enough spring. In any event, my Equal-i-zer representative tells me that the weight distribution head assembly of the 600 lb unit and the 1000 lb unit are different enough so that the bars are unfortunately not interchangeable, because the sockets that the spring bars insert into are smaller on the...
  view full answer...
• Can 600 lb Tongue Weight Equalizer Spring Bars Replace 1,000 lb Spring Bars
  The 6k Equalizer Spring bars part # EQ90-01-0699 that you mentioned will fit in the head of your 10k Equalizer hitch and would work well for you.
  view full answer...
• How can I Determine Which Size Spring Bars I Need for My Equal-i-Zer WDS?
  It is not going to be stamped on the bars, unfortunately, The easiest way to determine which spring bars you have is to measure the inside hole on the head where the spring bars would go. If you measured 1", then the correct bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-0499; If you measured 1-1/4", then the correct bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-0699; If your...
  view full answer...
• How Can I Determie Which Replacement Spring Bars I Need for My Equal-i-zer WDS
  The Replacement Spring Bar for Equal-i-zer Weight Distribution Systems # EQ90-02-0699 could potentially work however without knowing what system you currently have I won't be able to say for certain. The easiest way to find out what you need is to just measure the inside hole on the head where the spring bars would go. If you measure 1", then you'd want # EQ90-01-0499, if you measure 1 1/4" then you'd want # EQ90-01-0699, if you measure 1 3/8" then you'd want # EQ90-01-1099, and finally...
  view full answer...
• Replacement Spring Bars for Equal-i-zer Weight Distribution System With 1-1/4 Inch Wide Opening
  If the socket heads for your Equal-i-zer Weight Distribution System are 1-1/4" wide then that means you have the Equal-i-zer Weight Distribution System part # EQ37060ET and the correct replacement for this is the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems part # EQ90-01-0699. The next closest size is 1-3/8", the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems part # EQ90-01-1099
  view full answer...
• Which Replacement Spring Bars for Equal-i-zer EQ90-022-0600 Weight Distribution Head
  The proper replacement spring bars for the # EQ90-02-0600 Equal-i-zer weight distribution head are # EQ90-01-0699.
  view full answer...
• Will 600 lb Spring Bars Work With 1,200 lb Equal-i-zer System?
  In order to use the 600 lb TW Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-0699 on your Equal-i-zer Weight Distribution System # EQ37120ET you also need to replace the head unit because the spring bars have slightly different dimensions and the 600 lb TW bars won't fit hte 1,200 lb TW system. So to use 600 lb bars # EQ90-01-0699 you need the Replacement Head for Equal-i-zer Weight Distribution Systems # EQ90-02-0600.
  view full answer...
• Equal-I-Zer Weight Distribution System Recommendation for a 2014 28BHSWE Hideout Trailer
  The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. A Equal-I-Zer part # EQ37120ET that...
  view full answer...
• Dimensions of Trunnion Socket of Equal-I-zer # EQ90-01-0699 Weight Distribution System
  This dimension varies according to the capacity of the Equal-i-zer system. For a 10000 lb towing/1000 lb tongue weight system like the # EQ37100ET that would use the # EQ90-01-0699 spring bars you referenced. For this particular system, the inside dimension of the socket is 1-3/8 and the outer dimension is 2 inches. I've edited a photo for you that shows these dimensions.
  view full answer...
  
• What Spring Bars for Equal-i-zer Weight Distribution are Needed for Keystone Springdale 1750RD
  If the weight of the trailer is over half the weight of the tow vehicle then you'll need a weight distribution system. The rear suspension on the Ram also uses coil springs which are great but they'll sag more than the comparable leaf springs on a Ford or Chevy. Furthermore, the lighter trailers are typically the ones with sway control problems so I do think a weight distribution system is a good idea for you. That said, an overrated one won't do you any good so you'll want to replace the...
  view full answer...
• Replacement 1 Inch Square Spring Bars for Weight Distribution System with Sway Control
  If you are looking for weight distribution trunnion bars, we do have replacement options. Because you specified square bars that narrows down your system to an Equal-I-zer. We have the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems - 400 lbs TW # EQ90-02-0499 which are 35-1/2" long x 1" wide. If you want the set, we have the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 400 lbs TW # EQ90-01-0499. Those are the only bars that meet...
  view full answer...
  
• Are Equal-i-zer Spring Bars Interchangeable With Same Head Unit?
  It is possible for some spring bars to be interchanged based on their size, but that won't increase a weight distribution system's capacity without adding the appropriate head unit. The replacement spring bars that are rated for 1,200 lbs TW and 1,400 lbs TW have the same dimensions, but the spring bars rated for 400 lbs TW, 600 lbs TW and 1,000 lbs TW are different, as you can see below. Replacement Spring Bars for 400 lbs TW, # EQ90-01-0499: 35-1/2 inches x 1-inch Replacement Spring...
  view full answer...
• Dimensions of a Equal-i-zer Spring Arm 600 lb Tongue Weight
  The Equal-i-zer Spring Arms, # EQ90-01-0699, measure 35-1/2 inches long by 1-1/4 inch tall by 1-1/4 inch wide. These spring arms have a 600 lb tongue weight capacity. If you are looking to replace the spring arms on your Equal-i-zer system, then the easiest thing to do is to measure the socket on the head for the spring arms (see photo). All of the spring arms that Equal-i-zer makes are 35-1/2 inches long. If you have a 6,000 lb system, then the socket will measure 1-1/4 inches square....
  view full answer...
  
• How To Add More Tailgate Clearance To A Weight Distribution Hitch
  There aren't longer spring bars to increase your tailgate clearance but you can replace the shank of your WDH to gain some additional clearance. A standard shank on an Equal-i-zer WDH is about 12" in length so you could swap to the 18" # EQ90-02-4600 or # EQ90-02-4500 for an additional 6" of clearance. You won't be able to get a full extra 12" of clearance but this should help a bit. If you have a different weight distribution hitch let me know so I can make sure the shank is compatible with it.
  view full answer...
• Can Different Equal-i-zer Spring Bars Be Used With The Same Head
  Because of the way the head and spring bars are designed the bars will only fit the head of the same rating. I know most systems will let you swap out the bars, and that would certainly be ideal. If you want to switch to the 6k bars # EQ90-01-0699 then you will need to replace the head with the # EQ90-02-0600 as well. The brackets and the shank will work for all systems so there is no need to replace those.
  view full answer...
• Can 6K Equal-i-zer Bars Be Used with 12K Equal-i-zer Head
  In order to down-size to the 600 lb Equal-i-zer system you need the Equal-i-zer Weight Distribution w/ 4-Point Sway Control # EQ37061ET which comes with the smaller bars and the appropriate matching head size. You can still use the same shank, but since the bars are different sizes you need to have everything matching for the system to work properly. There aren't any adapters because that would cause issues with a weight distribution system. If you already have the smaller bars then you...
  view full answer...
• Recommended WDS Upgrade for an Older Husky Centerline Weight Distribution System
  Unfortunately no, there is no way for you to get the smaller diameter bars to work with the larger diameter hitch head for your Husky Centerline TS WDS. With this system being discontinued, you'd instead need to replace the entire system with a WDS that is better suited for your trailer. The Reese Pro Round Bar Weight Distribution w Sway Control # RE44FR is a great choice and sounds like it'd work much better for you. This WDS will work with trailer's that have a 600 to 1,150 lb tongue...
  view full answer...
• Spring Bar Availability for Equalizer Weight Distribution with Just Head and Shank
  If you have the head and shank already of an Equal-i-zer system you can piece together the rest of the kit. You will need a snap up lever part # EQ95-01-6050 if you do not have one of them yet. Now to pick out bars is going to be based on the tongue weight of your trailer. We have several sets. The capacity listed for them is the max tongue they are designed for. Ideally your tongue weight will fall right in the middle of the range of a set so you'd want your tongue weight to be a couple...
  view full answer...
• Can Smaller Spring Bars Be Used With Equal-I-zer Weight Distribution System
  Our contact at Equal-I-zer tells us that the head is different on the Equal-I-zer weight distribution system # EQ37100ET you have versus the 6,000-lb system # EQ37060ET. This does prevent you from being able to use the 600-lb spring bars # EQ90-01-0699 on your 10K system. These spring bars measure 35-1/2 inches long and are 1-1/4 x 1-1/4 inches square. The spring bars on your 10K system measure 35-1/2 inches long and are 1-1/2 x 1-1/2 inches square.
  view full answer...
• How to Change Weight Rating of Equal-i-zer Weight Distribution Hitch
  Weight distribution systems like the Equal-i-zer # EQ37100ET really do need to be matched to the trailer's actual fully-loaded tongue weight (TW). Using a 1000-lb system with a smaller travel trailer like your R-Pod can result in jumpy and unpredictable handling from the trailer and this is not recommended. The good news is that it is easy to change the rated capacity of the system by changing out just the two spring bars; you do not need to replace the whole setup. You can replace the...
  view full answer...
• Should 6,000 lb Equal-i-zer System be Used for Trailer with 550 lb Loaded Tongue Weight
  It really depends on how much weight you plan on having in the back of your tow vehicle. Since the tongue weight (TW) range of a weight distribution (WD) system includes both the loaded TW of the trailer plus the weight of cargo behind the rear axle of the tow vehicle the 1,000 lbs system # EQ37100ET may be better for your application because it has a TW range of 600 lbs - 1,000 lbs. If you don't plan on having any weight behind the rear axle of your tow vehicle then you possibly could...
  view full answer...
• Can 1,000 Lb Spring Bars be Swapped out with 600 Lb Spring Bars on a Equal-i-zer System
  For starters, I would not use the Equal-i-zer Weight Distribution System part # EQ37100ET that you have now as it is rated for a total tongue weight of 600 lbs - 1,000 lbs. The tongue weight of your 1967 Holiday Rambler is likely around 380 lbs - 570 lbs which means the above system is not going to perform well for you. Now I do have an option for you but the Replacement Spring Bars part # EQ90-01-0699 which are rated for a total tongue weight of 200 lbs - 600 lbs cannot be used with...
  view full answer...

Do you have a question about this Accessories and Part?