Search: charge controller   >  

The Replacement Converter Section for Progressive Dynamics 4000 Series RV Power Control Center part #PD4045CSV is a direct replacement for the converter section on the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part…

We have just what you need, the Go Power Portable Solar Panel with Digital Solar Controller, #34282610. This lets you place the solar panel where you need it for maximum sunlight while not having to place the camper in the sun too. For the later…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

You could install the Rack'em Fitz-All Enclosed Trailer Ladder Rack Item #RA-28 on your trailer and mount the Thule HideAway Awning - Wall Mount - Waterproof - 80 sqft Item #TH490011 to it. Attaching it to the rack will allow you to place it…

The Thule HideAway Awning part #TH490011 offers direct mount installation. Therefore, you'd need to attach the brackets directly to the wall of the trailer. If you have existing brackets, these would need to be removed. I have attached for you…

Yes the weight distribution system manufacturers do offer replacement mounting brackets for their systems so that you could have one system that fits two trailers. For example the Blue Ox kit part #BLU87FR that you referenced has replacement mounting…

Blue Ox does not have a torque spec available for the L-bracket plate you referenced. I would recommend just hand tight with an appropriate sized wrench or socket and it will be fine. No need to use any type of leverage bar to get it any tighter.

Per the instructions(linked below) for the Blue Ox TrackPro Weight Distribution #BLU27FR you should have at least one open hole on your L-Brackets #BLU42QR. It sounds like your hitch head may be pitched to far down or you have an underslung coupler.…

What you would need is the part #RM910003-32 for the bolts, the part #RM-200029-10 for the bushing and then for the yoke part #RM910575 and you'd be set. There isn't an entire kit that covers all the parts you need but with these three part…

If you just need to replace the inner arm on your RoadMaster Sterling All Terrain Tow Bar, part #RM-576, you will first need to check the serial number on the tow bar. If the number is lower than 27824 then you have the older style Sterling tow bar…

When brand new the yoke on the Roadmaster Sterling All Terrain Tow Bar #RM-576 will be quite stiff, but after some miles it will loosen up. This is normal. If your tow bar is for example only a year old, I would not be concerned, but if it is 5 years…

Since Go Power does not offer a Solar Extreme Charging System like #34282185 with a 30amp MPPT Controller #GP72RR you would need to get all the components separately and build your own system. Here is a list of the parts needed. Go Power Overlander…