SeaSucker Kitchen Station 2.0 With Extension - Vacuum Mount - Black

Video Transcript for SeaSucker Kitchen Station 2.0 With Extension Feature Review

Hello neighbors, Steve here with etrailer.com. Today we're looking at our SeaSucker Kitchen Station 2.0 with the extension. Now this is a vacuum-mounted installation and it's black in color. So folks, obviously I don't have a smooth flat surface here, unfortunately, that I can suction this to and kind of show you what it looks like technically installed all the way, but you'll kind of get the idea hopefully. Let me step outta the way so you can see it better. My black shirt kind of hides it.

Pretty simple. This side here would be vacuum suction to your smooth non-porous surface such as metal, glass, fiberglass. And then you could then serve food. So it has a nice tabletop with an edge, and then you got the extension. You can pull it out, give it a little more space.

That kind of thing. And it just slides back in. So, pretty simple. When you get it, it will be in a couple pieces. You'll have to put all the vacuum cups on, and then this angle bracket here and this base will kind of snap together in the holes and stuff here on the front.

Now I will tell you it took me a little bit of effort and a lot of hard pushing to do that. Once you get it in place, this guy's adjustable and this cup can go up or down like so if you need to tilt the angle and that kind of stuff. So just keep that in mind. You have a little bit of adjustment here. You can kind of see that angle on the flat plane and you get a little bit of adjustment.

So just wanna show you that. The pull rating with these three 4.5 inch in diameter suction cups here or vacuum cups, (cup tapping) one, you get three hard plastic covers. That's gonna cover and protect that surface there. As far as installation, once you're on that flat surface, you simply pump this until all the orange is out, So it would look like this, and then it's gonna be suctioned onto the wall and it has a pull rating of 120 pounds per each vacuum cup. So a total of 360 pounds pull rating. It is made here in the US. There we go. Made here in the US, nice limited lifetime warranty. I do recommend you purchase some lubrication that's sold separately. It's like a gel. Basically, you're lubricating these hand pumps here and that just keeps 'em all nice and working clean. You don't have to worry about 'em gumming up over time and not working on you. So again, it would mount like this. And then once again, you have that full extension. Now some dimensions. Bear with me here. When I had this extension fully open, I got right at 26 3/8. Now on the extension itself, it's about 16 inches wide by 10.5 inches. And then closed, on this, I get about 16. And then this side, if I include this top lip, I get roughly 21 inches. So there's some dimensions for you. I hope that kind of gives you a better idea of the size. I'm six foot two. It kind of takes up most of my torso here, especially when it's open like that. So again, nice little Kitchen Station 2.0 with the extension. I'm Steven. Thanks so much for watching, folks. Stay safe out there and have a great day.