Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling serious weight, this wheel keeps things steady. The Taskmaster Modular Wheel measures 17-1/2" x 6-3/4" and carries up to 6,005 lbs. It’s made from heavy-duty steel with a sturdy modular design, so it handles the kind of loads that demand confidence mile after mile.
The +0.08" offset keeps the centerline in line with your setup for balanced handling. Because it’s hub-piloted, the wheel centers on the hub itself rather than the lugs, giving you a solid, true fit every time. It’s designed for use with 5/8"-18 flange nuts (sold separately), the right hardware for secure mounting on a hub-centric design.
Moisture and road grime don’t stand a chance here. The wheel goes through a zinc phosphate bath, an acrylic e-coat primer, and a baked-on DuPont white powder coat—on both sides of the rim. That triple process seals out rust and keeps the finish looking clean and bright through years of use.
Every detail’s accounted for. A metal valve stem is already included, and the wheel meets SAE J1204 standards for quality and durability. With its 8 on 6-1/2" bolt pattern, 4.76" pilot diameter, and 2-year limited warranty, it’s built to handle demanding jobs without cutting corners.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Taskmaster 17 and a half inch by six and three quarter inch white modular wheel with a positive offset and has an eight on six and a half inch bolt pattern. Now this is a heavy duty steel wheel, it has the eight hole modular design which is sturdy and corrosion. This is a design, you can see it has the eight round holes that go around the wheel. These are designed for use on trucks, buses, and trailers. Now on this wheel, they do use a three step finishing process, which will first include a zinc phosphate bath, then an eco-primer, and then a white powder coat on both sides of the wheel.
This wheel is a hub piloted wheel, which means it'll require an exact fit of the center hole right here, this pilot hole to the hub on your vehicle. The pilot hole diameter on this is 4.76 inches. Now, hub piloted wheels do require the use of flange nuts for installation. Those we do sell separately on our website. They're usually listed on this product page as a related product.
And the size of the flange nut that's used is five eights of an inch by 18. Now this wheel does have a slight positive offset of 0.08 inches, and a positive offset means that it'll move this wheel and tire closer to the center line of the trailer. If you notice, they do include a high pressure metal valve stem already installed in there. Now this wheel does meet the SAE J1204 Standards. A few measurements on this.
We talked about the diameter on it being 17 and a half inches, and when you measure it, it's the inside measurement. So if we take our tape measure and if we go all the way across, you'll be able to see it's measuring 17 and a half inches for the diameter. The width will be the same way. You're measuring bead seat to bead seat, so inside the inside. So if we go right across, six and three quarter inches for the width, the bolt pattern on this wheel is a eight on six and a half inch bolt pattern.
You can see the holes right here. If you wanna measure the bolt pattern on the wheel, that's an even number of lugs. In this case, eight. It's pretty easy because the lug holes are right across from each other. So when you go to measure it, all you have to do is pick one of the holes like this one, measure from the center of this hole, directly across to the center of the hole right across from it. On this one, it'll measure six and a half inches, so that means it's an eight on six and a half inch bolt pattern. And the weight capacity on this wheel, which will be stamped in the back here, is 6,005 pounds. But that should do it for the review on this Taskmaster 17 point a half inch by six and three quarter inch white modular wheel with a positive offset, and the eight on six and a half inch bolt pattern..
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Lloyd O.
7/6/2025
I havent needed to use this yet as it is a spare, However is still looks brand new. I throw it in the back of the truck as a piece of mind.
Lazer S.
7/7/2025
Brooke M.
5/26/2025
Totally, Brent! Now if you have to use the spare, you'll still be riding in style :) Did you spend any time on the water over the weekend?
Peter T.
10/27/2017
I love both the tires and rims. With the old tires I’d drive down the expressway doing 60 mph max with a speed limit of 70. Scared I was going to have another blowout which ended up costing about $1500 in repairs plus the experience for 5 feet away from 70 mph semis. Now it trailer my RV at 70 with no concerns of a blow out. Thanks for providing a tire I couldn’t get any where else.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joshua
7/24/2025
wheels still working fine 1 year later