Hello Frank, thanks for reaching out. Sounds like typical Ford for you lol. We do have a plug-in brake controller option for the 2025 Ford F-250. For that I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED67CR since it…
The MB Sturgis Propane Hose w/ Back Check - Type 1 x 1/4" MPT - 36" #100473-36-MBS is a great replacement for the part you referenced but it isn't quite as high a capacity. Nothing in a traditional RV will require the 450K BTU lines and…
A lot of Ford trucks use fuses and relays for the tow package wiring. Use the owners manual to locate all of the relays and fuses associated with the tow package wiring. Also, there can be tow package fuses in both the power distribution box under…
To add a 7-way, you can use part #118283, and plug it inline at the connection between your existing 4 pole and the factory wiring harness. To install the Tekonsha P3 #90195 brake controller, all you'll need is the #22292 wiring adapter to…
It sounds like you're looking for the Buyers Products Truck Mud Flaps part #337B30LXP which measures 24" wide x 30" tall x 3/8" thick. These are made of durable rubber which is very strong, have pre-drilled holes for an easy…
Thank you so much for the photos and all of the info! Currently none of our manufacturers have an adapter that they have tested and approved to work with that connector you found on your 2022 Volkswagen Atlas, so you'll have to cut off that…
Hey Dena, Both the Tekonsha Prodigy P2 Trailer Brake Controller #90885 and P3 #90195 are very similar, with the only difference really just being that the P3 has more settings and configurations to play around with and a nicer display. They will both…
There is indeed a brake controller connector under the dash of your 2017 Nissan Pathfinder. It's located under the dash, to the left of the steering column. Look for a harness with a white tag that reads 'Brake Control Conn'. The plug…
The Curt hitch part #C15410 is confirmed as a fit for your 2002 Ford F-250 and it fits with full size spare as long as the wheel diameter is less than 20 inches. It is designed to work with 2 inch ball mounts too. I attached an install video for more…
Actually if you look at the attached photo you can see that we didn't remove the wiring that is mounted to the bumper on the 2003 Ford F-350 when we installed the Curt Trailer Hitch Receiver #C15410. I have attached an installation for you to…
Filters
