Result: bargman

We have several options for replacement 84 Series Bargman lights like what you have. If you have a two panel light we have the part #30-84-527 or if you have a three panel part #30-84-509.

Hey Chip, yes I agree the metal lid of the Ventline Ventadome part #V2110SP-24 is going to hold up the best over time which would mean you wouldn't have to worry about replacing the lid for a very long time. How old is the trailer?

Thank you for the photo of your vintage trailer hub. This type of hub uses bolts rather than lug nuts to secure the trailer wheel. We offer kit #RG02-020 which consists of four (4) 1/2-inch x 1-inch 60-degree-coned wheel bolts. We also have a kit #…

It sounds like you are comparing the Hydrastar Vented Marine Electric Over Hydraulic Actuator #HS381-8067 and the Hydrastar Electric Over Hydraulic Actuator #HBA16. The Marine #HS381-8067 features stainless steel hardware, a vented end plate, and a…

The Hadco 322 is obsolete and no longer around. I don't have any information on the bearings it uses either, so you will need to identify the bearings to see if there is a possible replacement. You can look to see if the part number is stamped in…

Thanks for providing the picture. It looks like your current marker light is around 3 3/4" long and 1 1/2"- 2" wide and has mounting holes 3" apart. While we don't have anything in those exact dimensions, we do have several…

I attached a wiring diagram to this page for the Buyers Products 9 LED Strobe/Marker Lights #3378892000 that you referenced.

Hey Arnaud, thanks for the information! The Weigh Safe True Tow Weight Distribution Hitch item #WS49MR would be a great option for a 17,500 lbs trailer. It will work with tongue weights up to 1,850 lbs but it's not going to be overrated for your…

For your Parallax/Magnatek 6300A model 6345, I recommend going with the: -Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V. This system has a 45 amp output same as your current model 6345, will work with flooded lead…

We only carry the springs for those heavy duty style ramps. For the springs we have the Ramp Spring - 2K Torque for 1-1/2" Shaft - left hand #RS16933LH and corresponding right hand #RS16933RH. The other parts will need to be either straightened…

Hi David; based on what we have found in the past your TDE 46845 uses #L68419 inner and #L44649 outer bearings. There should only be the one grease seal like a standard hub, which as far as we know is the #168255TB with an inner diameter of…

The Optronics Clearance or Side Marker Trailer Light #MC68AB and #MC68AB are the same size as the Grote 9015 lights. Unfortunately they are not available from the manufacturer with a LED light. You can change the incandescent bulb to an LED Bulb…