Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…
Thanks for asking Glen, I found the specs you were asking about. Bigfoot Hydraulic Tongue Jack #BF34FR has 16.5 inches of lift, and when it’s fully extended it measures at 24 and a half inches overall. Retracted, it sits at 8 inches, so you get a…
Hey Eric! For air bags I recommend going with Firestone. They make the most durable and reliable air bags for your 2024 F-250. If you don't mind using your phone to control the air compressor you can use the Firestone Ride-Rite Air Bags w/ Easy…
You will want to find lights that match the lights you currently have on your trailer. If you have incandescent lights I recommend either staying with incandescent or swapping out all of the lights to LEDs. LED lights draw much less power, so you may…
We do have the Trimax Trailer Wheel Chock and Lock (12" - 15" Wide Tires) #TMX72ZR listed a little odd, but hopefully the following will help clear things up. The #TMX72ZR will fit the following sizes: 4.8"-R12 195/75 R14 205/60 R15…
On a trailer the brake lights and turn signals operate on the same wire/bulb. So, it is odd when the turn signals work, but the brake lights don't. There are 3 possible causes for this that are more likely than any of the other possible causes.…
The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…
Hey Monty, When installing hubs on an axle they should turn freely. Initially you will feel slight resistance but once the seals set it should be able to turn freely. Some things that may cause resistance could be a damage or improperly pressed…
Hello JT, thanks for reaching out. You are on the right track with your drawing. The etrailer Single Axle Trailer Fender #HP33RR are designed to be bolted on from the top of the step onto a bracket. These specific etrailer brand fenders are a new…
Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…
Hey Bill, The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR has an 18.08" measurement from the center of the coupler to the center of the first bolt holes. When switching to a gooseneck pin box from the Lippert Turning Point…
Hey Bob, thanks for reaching out. The cutout for the step on the etrailer Single Axle Trailer Fender #HP93RR is approximately 5-1/2" wide, so it will work just fine with your 5" wide ShoreLand'r fender plate. That gives you about…
Filters
