Search: Trailer Stabilizer   >   Hunting and Fishing   >  

There is no difference between the 2,500 version of the SnapPad SnapJack for RV Scissor Jack Stabilizers, and the 5K to 7K version #SN65FR. The only difference between the two would be the capacity they can handle. In order to determine which one…

Hi Shane; for an over/under kit for your 2-3/8" diameter trailer axles what you will need is the following: - Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 Keep in mind this kit is for a single axle only, so for a tandem axle…

The Kuat Transfer V2 Bike Rack item #KU84FR weighs 37 lbs and can be used on a vehicle being flat towed.

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

The Malone Trailer Tongue Kickstand #MPG467 is made to keep the trailer tongue 15 inches off the ground and is designed for Malone trailer tongues that are 2 inches wide by 3 inches tall. The Yakima Rack and Roll trailer has a tongue that is 2 inches…

The driver side trailer tail light #271575 has an additional function, the license plate light. So it and the right side, #271574, are not the same. I have included a picture that shows the license plate light at the bottom of the driver side light.

The Solera 12V Power RV Awning Conversion Kit #LC434724 that you referenced would work great as a replacement for the Carefree Fiesta manual arms you have now. This will make extending and retracting your awning much easier. I attached a review video…

The Dexter Trailer Springs Over-Under Conversion Kit like part #K71-384-00 does not require welding. That said, it is recommended to tack the spring seats to the axle but this is super easy to do even for someone with no prior welding experience. It…

I attached a couple pictures that I took from the install instructions for the part #75950 that you referenced. According to the instructions the only fascia trimming that would be required would be if you installed the hitch on a Touareg.

To raise the rear of your 2019 Jeep Wrangler JL 4 door you have a couple options. The first option you mentioned that you already have a weight distribution that works well for you when you have the motorcycle in your toy hauler trailer. Depending on…