What Is the Difference Between the 2.5K Version and the 5K Version of the SnapPad SnapJack?

Question

Question:

How can I tell if my rv needs the 2500 lb or the 5000 and what is the difference between them.

asked by: James F

0

Expert Reply:

There is no difference between the 2,500 version of the SnapPad SnapJack for RV Scissor Jack Stabilizers, and the 5K to 7K version # SN65FR.

The only difference between the two would be the capacity they can handle. In order to determine which one you'd need, you'd need to determine the capacity of your trailer jack and compare it to the feet and choose the set that matches your capacity.

expert reply by: Bryce D

0

Answer 1

Hey Frank. The SumoSprings Trailer Helper Springs w/ Line Relocation Bracket item #SS26MV you were looking at are going to take some of the bounce out of your trailer's suspension. They will smooth out your ride as they essentially act like shock…

view full answer...

Answer 2

Thanks for reaching out, Mark! The Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs #TJSCHD-24-4 are designed with 11 Gauge steel and install using 1/4" self-tapping screws like the Self-Tapping Screw #FA1131822. Then for base…

view full answer...

Answer 3

We do offer many styles of replacement trailer fenders in plastic, steel and aluminum that you can check out on the page I linked for you. To start, click on your wheel diameter. I reviewed many photos of the 2011 RP-177 and it appears that the steel…

view full answer...

Answer 4

When adjusting the height of a pin box such as #LC1191191 it is important to support the pin box when removing the bolts. I recommend 2 or 3 buddies to give you a hand and make sure no one is beneath the pin box while raising or lowering it. With the…

view full answer...

Answer 5

The distance between the bolts on the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers #SN65FR is 2" on center which is the standard. If you want to use these with your scissor jacks the only option would be to replace the one with the…

view full answer...

Answer 6

The spacing between the mounting holes on the SnapPad SnapJack for RV Scissor Jack Stabilizers #SN65FR is approximately 1-7/8".

view full answer...

Answer 7

Hi Marty; to answer your question, the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers #SN65FR will work for your 9,200 lb trailer, yes. The specs aren't actually for the SnapPads themselves (which I know is a bit confusing). The #SN65FR will…

view full answer...

Answer 8

Yes, the SnapPad SnapJack part #SN65FR will work with the JT's Strong Arm Jack Stabilizer Kit #LC191025 for scissor jacks. SnapPad doesn't create any clearance issues with the StrongArm.

view full answer...

Answer 9

The #TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

What Is the Difference Between the 2.5K Version and the 5K Version of the SnapPad SnapJack?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching