The U-bolts on the U-Bolt Kit for Mounting 8,000 lb Round Trailer Axles #APUBR-35 are 9/16". The torque specs for 9/16" bolts on trailer suspension 65 ft/lbs - 95 ft/lbs. Torque specs depend on bolt size: 1/2" bolts: 45 ft/lbs - 70…
Here's the mentioned torque setting to use for the spindle nut of the Dexter 8k axles: 1. After placing the hub, bearings, washers, and spindle nut back on the axle spindle in reverse order as detailed in the previous section on hub removal,…
Hey Clark, are you possibly overloading the trailer suspension? Or do you travel on some pretty rough roads by chance? Are you using the same brand spring every time?
It seems like you have the ADTH 1RV-200 Motor which has a capacity of 6,500 lbs. You can use this replacement motor #LC142178 which has a 4" on center mounting hole spacing. This one is a bit heavier duty than your other which could prevent it…
From what I could find it looks like your ADTH 1RV-200 motor has a weight capacity of 6,500 lbs. You can use a motor that is rated for a higher capacity, like our replacement motor #LC142178 for Ram landing gear which is rated at 8,000 lbs. Just keep…
Hey Andrew, thanks for reaching out! The flat tow wiring will need to be spliced in on the vehicle side of your 2025 Ford Bronco wiring, and then I recommend picking up one of the Tekonsha trailer harnesses that then tees in between the vehicle and…
Hello! Sorry but the only option for a replacement remote for the Tekonsha Prodigy RF Wireless Brake Controller is the Replacement Handheld Remote item #TK27FR you were looking at. The only solution I have for an easier interface is for you to…
It looks like you have the original version of the Prodigy RF, part 902501, which was updated to the newer version of the Prodigy RF TK94FR (also known as part 902502). The replacement controller #TK27FR you're looking at is for the newer model…
After the Curt Echo Wireless Brake Controller #C51180 is installed and paired to your phone it will continue to function as a proportional brake controller whether or not your phone is on. If your phone happens to die mid-trip, the brake controller…
I recommend replacing your lights with the LED RV Dome Light w/ Switch #RVILL50. These LED lights will outlast and use less power than the florescent tube lights in the Liteco 179 that you currently have. These lights are 15-3/4" long x…
Hey Steve it looks like the oven you're referring to has been marked obsolete by Furrion so there are no replacement parts for it unfortunately. We do have the Replacement Oven Door for 21" Furrion 2-in-1 Range Oven #FR66NR which fits the…
The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.
Filters
