Adapter Kit for Roadmaster Falcon 2 or Tracker Tow Bar to etrailer Base Plates

See what our Experts say about this etrailer Accessories and Parts

• Can etrailer Bases Plate Kit e98967 be Used with Roadmaster Falcon II Tow Bar
  To use the etrailer base plate kit part # e98967 with a Roadmaster Falcon 2 tow bar # RM-520 requires the use of the adapter part # e99037.
  view full answer...
• Can Roadmaster Falcon 2 Tow Bar Connect to etrailer Base Plate Kit e98949
  The Roadmaster Falcon 2 tow bar you have # RM-520 can connect to the etrailer base plate kit part # e98949 you have but you do need an adapter as the connection cannot be made directly. So what you'll need in addition to what you have is the part # e99037 and you'd be set.
  view full answer...
  
• Will Roadmaster Falcon 2 Tow Bar Work With etrailer Invisible Base Plate Kits
  In order to use the Roadmaster Falcon 2 Tow Bar part # RM-520 with etrailer Invisible Base Plate Kits like part # e98962 you'd need the Adapter Kit part # e99037 but that's all. In regards to base plate installation, these almost always require cutting or trimming of the front bumper fascia but the severity will vary by vehicle. The 2017 Ford Explorer isn't bad though.
  view full answer...
  
• How To Use Roadmaster Tow Bar On 2021 Jeep Wrangler
  I do have an option but there are currently no Roadmaster base plate kits for a 2021 Jeep Wrangler per Roadmaster. Therefore, I must recommend the etrailer Invisible Base Plate Kit part # e98948 which is a better option because it replaces the ends on the tow bar so you have one less part to keep track of and connect each time. It will work with Roadmaster Nighthawk All-Terrain, Sterling All-Terrain, Blackhawk 2 All-Terrain, and Falcon All-Terrain and the Roadmaster Falcon 2 or Tracker...
  view full answer...
• What Do I Need To Haul My 1999 Jeep TJ?
  You pretty much have everything you will need to haul your 1999 Jeep TJ, but you will need an adapter to connect the etrailer Invisible Base Plate Kit # e98946 to the Roadmaster Falcon 2 Tow Bar # RM-520. Here is the adapter # e99037. The Brake Buddy Classic 3 # HM39494 is a good reliable choice and the Roadmaster Brake-Lite Relay Kit # RM-88400 will work with your Jeep. I would suggest getting the RoadMaster Falcon 2 and Falcon All-Terrain Combo Towing Kit # RM-9243-1 because you are...
  view full answer...
• Parts Needed to Flat Tow 2020 Jeep Wrangler
  You are on the right track for a great flat towing setup for your 2020 Jeep Wrangler. The etrailer base plate kit part # e98948 is a fit and can work with your Falcon All Terrain part # RM-522 without an adapter. You do not need the pins you mentioned. Everything else you mentioned would be a solid choice too. # SM99251 for breaking, # RM-15267 for lighting, and # RM-156-25 for a charge line kit.
  view full answer...
• Parts Needed to Flat Tow a 2014 Jeep Wrangler Using a Roadmaster Sterling Tow Bar
  To flat tow your 2014 Jeep Wrangler you will need a base plate kit, tow bar (which you have already), tow bar wiring, safety chains (which you may have already with your tow bar) and a supplemental braking system. Roadmaster makes the Sterling tow bar, so I am going to base my recommendations around your tow bar and that you have a factory bumper. If you do not have a factory bumper your base plate kit could be different, so just let me know if you do not have a factory bumper and I can...
  view full answer...

Do you have a question about this Accessories and Part?