Search: 6 Pin Connector   >   Hitch Anti-Rattle   >  

Hey Miles, so the Curt tow bar lighting kit part #C96JR that you referenced installs by plugging inline with the taillight connectors of the vehicle so it's not going to interfere with any trailer wiring.

I recommend switching to the Ark Drop Down Corner RV Stabilizer Jacks #AR34FR on your 2019 Rockwood 2109S. These use a zinc coating for corrosion resistance which is superior to the powder coat finish used on the Scissor Jacks #LC285325 included…

Yes, we do carry the Roadmaster 523223-5 under part number #RM53GR. We use our own unique part numbers for a lot of Roadmaster parts, so this may be why you did not see it. I can tell you that this is a "two piece" base plate, and…

Yes, it can! To flat tow a 2024 Chevy Silverado 2500 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Direct-Connect Base Plate item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

If you are looking for a quick and easy plug and play wiring to get your 2021 Jeep Wrangler JL set up to be flat towed behind an RV, then the Curt #C96JR will not require a wire to the battery. This will plug in behind the tail lights and then…

It sounds like you have done your homework. You are correct that the smart diode kit #RM47ZR will be needed for your 2023 Trailhawk. This kit does not include a charge line. The good news is we carry a wiring kit specifically for this purpose…

You must run the hot lead to the battery when installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56407 on your 2021 Jeep Wrangler. The reason is because this is the only way to ensure your Jeep's wiring is…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

The Ark Drop Down Corner RV Stabilizer Jacks #AR34FR that you referenced installs by having the top of the bracket weld to the bottom of the RV frame.

The Scissor Stabilizer Jacks w/ Handle #TJSCHD-24-4 can absolutely be welded on versus bolted on if you prefer. The frame of your fiberglass travel trailer will still be steel, so you can mount it to the frame in either manner. Welding will…

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

I had the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR measured and the distance from the center of the crank bolt to the top of the mounting flange is 2-1/2".