bing tracking image
  1. Trailer Jack
  2. Dutton-Lainson
  3. Enclosed Trailer
  4. Utility Trailer
  5. 1001 - 2000 lbs
  6. Manual Jack
Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs.
Dutton-Lainson

Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs.

Part Number: DL22580
In Stock
$136.50
Retail:$144.81
You Save: $8.31
Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers. Great Prices for the best trailer jack from Dutton-Lainson. Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs. part number DL22580 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (149)
  • Q & A (0)
  • Photos

Dutton-Lainson Trailer Jack - DL22580

  • Enclosed Trailer
  • Utility Trailer
  • 1001 - 2000 lbs
  • Manual Jack
  • Bolt-On
  • Side-Mount Jacks
  • Swivel Jacks
  • With Wheel
  • 12 Inch Lift
  • Dutton-Lainson
  • Standard Grade

Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.


Features:

  • Easy to install:
    • Bolt on mounting
      • Can be mounted in a variety of ways on various sizes of trailer tongues
  • Smooth operating
  • Heavy-duty tongue jacks reduce physical effort required to maneuver loaded trailers into hitching position or removing the trailer from a vehicle
  • Made from heavy-gauge steel for strength and durability
  • The enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw
  • Has maximum manueverability because of the offset swivel caster assembly
  • Ergonomic hand grip with textured surface
  • Made in the USA


Specs:

  • Capacity: 1,500 lbs
  • Lift: 12"
  • Fits square tongues up to 3" x 5"
  • All mounting hardware included
  • 2-1/2" Diameter mounting hole in swivel bracket
    • Fits most other brands of mounting hardware
  • Zinc plated TUFFPLATE finish for longer life
  • 3-Year limited warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



22580 Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs.

Compare to Fulton F141133

Similar to F27CR Fulton Boat Trailer Jack (Except with Zinc Finish)





Customer Satisfaction Score:

Ratings & Reviews

4.7

149 reviews
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Works as advertised.



by:



by:



by:

awesome service, speedy delivery!!
Thank
you!



by:


25
149
Show More Reviews

See what our Experts say about this Dutton-Lainson Trailer Jack

  • Trailer Jacks Manufactured in the USA
    There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options: Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. # DL22800 Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. # DL22560 A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 Pull...
    view full answer...
  • Mounting plate Dimensions for the Pro Series Jack # PSEJ10000101 to Mount on a LAK Sailplane Trailer
    I went out to the warehouse and pulled one of the Pro Series Snap-Ring Swivel Jacks, # PSEJ10000101, to measure for you. I added dimensions to a photo I took of the mounting plate for you to use to see if the mounting pattern will match up to your mounting plate on your LAK sailplane trailer model T-5. The overall dimensions of the mounting plate are 6-3/8 inches by 5-1/2 inches, and the bolt hole pattern is 4-3/8 inches on center for the outer most holes, 3-3/8 inches on center for the...
    view full answer...
  • Replacement Jack for Ranger Boat Trailer With Dutton Lainson 203960C
    What you have there is a Dutton Lainson jack. There is no longer a direct replacement jack, but you can use the # DL22580 which will be an upgrade. This is a swivel jack with a 1,500 lb capacity and 12" of lift. This has dual wheels for easy maneuvering and a bolt-on installation.
    view full answer...
  • Recommended Replacement for Dutton-Lainson Jack on New Shorelander Boat Trailer
    Dutton-Lainson jacks are manufactured right here in the US and are actually really good quality. The mount used by your current Dutton-Lainson jack wouldn't be compatible with the Fulton F2, which leaves you with a couple of options. You could upgrade your current 1000 lb jack to a 1500 lb capacity Dutton-Lainson model like part # DL22580, which would allow you to utilize your current mount. The jack provides dual wheels for greater maneuverability and stability. You could also use...
    view full answer...
    Image 1 for
  • Availability of Trailer Swivel Jack with Pneumatic Tires
    If the tongue weight of your trailer is less than 500 lbs, the Trailer Valet Swivel Jack and Trailer Mover, part # STC-V211 might be a good choice. The jack swings up next to the trailer frame so it'll be out of the way of your truck tailgate and the jack features two pneumatic tires. This is the only jack we offer with pneumatic tires. If you click the provided link, you can see a demonstration video of the jack. The wheels on the jack are actually driven by one of the crank handles on...
    view full answer...
  • Trailer Jack with Wheels to Make it Easier to Move Around a Trailer by Hand
    Standard trailer jack wheels are either plastic or metal so there isn't a rubber tire available. But we do have the Trailer Valet # STC-V211 which is both a jack and a trailer mover rated up to 500 pounds tongue. You may also be able to use mount # DL22144 which holds a spare tire but can also use that spare tire to make it a dolly. The only problem would be turning since this is a fixed position carrier. Another option is to use a different jack that has dual wheels. That would make...
    view full answer...
  • Who Manufactures etrailer Round/Wheeled Swivel Jack
    The # MJ-1500B-DWL is made in China. If you're looking for a USA made alternative I recommend the Dutton-Lainson # DL22580. This has a 12" lift, the same 1,500 lb capacity, and dual wheels. It uses a bolt-on installation and fits square tongues up to 3" x 5".
    view full answer...
  • Dimensions of the Dutton-Lainson Jack # DL22580
    I spoke to my contact at Dutton Lainson to get the dimensions you requested. The overall height of the jack when fully retracted is 26-1/2 inches. It measures 14-1/2 inches from the center of the bracket to the bottom of the jack wheel. It measures 12 inches from the center of the bracket to the top of the jack. When fully extended the jack is 38-1/2 inches. This jack has a 12 inches of travel.
    view full answer...
    Image 1 for
  • Recommended Trailer Jack For Enclosed Cargo Trailer
    If you have a square frame trailer I recommend a jack like part # DL22580. This is a swivel jack and it has dual tires that make it easier to move. This jack can be used on trailers with a frame up to 3 x 5-inches. Instead of adding a jack to your trailer you may want to consider just using a trailer dolly. We have several tow dollies to choose from based on what you need. If you need a 1-7/8 inch hitch ball for your trailer you can use the Rack'em Trailer Dolly, part # RA20. This...
    view full answer...
  • USA Made Swivel Wheel Trailer Jack for Use in Saltwater
    The Dutton-Lainson Swivel Marine Jacks are manufactured in the USA. These include the # DL22580 and the # DL22800 1500 lb swivel jacks. These are both galvanized steel which will do a great job fighting saltwater corrosion.
    view full answer...
  • Recommended 1,200 - 1,500 lb Side Mount Boat Trailer Jack Made in USA
    The only side mount trailer frame jacks made in the USA we currently offer are from Dutton-Lainson such as the Pull Pin, Easy Swivel Trailer Jack part # DL22580 which has dual wheels for easier operation. It also has a 1,500 lb weight capacity with zinc plating for use on boat trailers. I have attached a full list of our Dutton-Lainson side mount jacks below as well.
    view full answer...
  • Can Dutton Lainson Trailer Jack # DL22580 Fit Shorelandr Trailer
    Yes, due to the various ways the mounting bracket of the Dutton Lainson jack part # DL22580 can install I am confident it will easily work on your Shoelandr trailer.
    view full answer...
  • Dutton-Lainson Trailer Jacks That Are Made In The USA
    We carry the Dutton-Lainson line of jacks that are made in the USA. Here are a few of the different jacks that we carry from them. A-Frame Jacks 1,000LB A-Frame Trailer Jack with Caster Wheel # DL74MR 5,000LB A-Frame Trailer Jack # DL22772 Side Mount Jacks 1,500LB Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels # DL22580 2,000LB Drop Leg Trailer Jack with Footplate # DL97MR 2,000LB Pipe Mount Swivel Style Trailer Jack with Foot # DL22682
    view full answer...
  • Recommendation for a Trailer Jack with Dual Wheels for Pop-up Camper with Off Road Package
    A trailer jack with dual wheels such as # FXPD15L are generally easier to move around on different types of terrain. I actually recommend a Dutton-Lainson swivel jack # DL22580. It also has dual wheels. It features 12 inches of lift, fits up to 3x5 inch frames, and is higher quality with a much better warranty (3 years). I have linked a video review of this jack for you.
    view full answer...
  • Dimensions of Wheels and Bolt on Dutton-Lainson Replacement Dual Poly Wheels # DL22441
    I contacted the engineering team at Dutton-Lainson to obtain the precise wheel and bolt dimensions. The wheel diameter for the DL Replacement Dual Poly Wheels, part # DL22441, is 6 inches. Each wheel measures 1.94 inches wide. The supplied mounting bolt measures 6 inches long and 0.5 inches in diameter. I have attached a brief video to help illustrate this part and its dimensions. I also provided a photo of this part with the various dimension indicated.
    view full answer...
    Image 1 for
  • Is Mounting Hardware Included With The Dutton-Lainson Trailer Jack, # DL22580
    The Dutton-Lainson Trailer Jack, # DL22580, does come with all the mounting hardware. The mounting hardware that comes with the jack is the Dutton-Lainson Mounting Hardware, # DL22443. It will fit trailer tongues up to 3 inches X 5 inches, so it will fit your trailer securely. The jack has a 12 inch lift and a capacity of 1,500 lbs. I am sending a video link of a similar jack being installed on a trailer.
    view full answer...
  • How Could Jack Handle be Secured to Jack Body so that it Stays Horizontal When Stored
    Sounds like you are looking for a way to keep the handle of the Dutton Lainson jack part # DL22580 horizontal when the jack is in the horizontal, stored position. Most likely you want to this so the handle doesn't drag. This isn't a super common situation so there isn't a specific solution for this but what you can do is use a strap like the part # EM06701 to basically strap the handle to the main body of the jack so that it wouldn't turn down.
    view full answer...
  • What is the Diameter of Replacement Pull Pin # DL22454
    Replacement pull pin # DL22454 is indeed a 1/2 inch diameter pin. It is designed as a replacement for Dutton-Lainson trailer jack # DL22580. A standard hitch pin for 1-1/4 inch trailer hitches also has a 1/2 inch diameter, # PC2.
    view full answer...
  • Trailer Jack With Wheel Recommendations For Dorsey Trailer
    We have several trailer jacks that have a wheel that allows you to move your trailer around when uncoupled fron the hitch. When choosing a trailer jack you will want to find one that has the capacity to handle the tongue weight of your trailer. I have attached a link to the jacks we have with wheels you can check out. If you are looking for an A-frame jack I recommend part # BD165412. This has a 1,200-lb capacity and has a lift of 19-inches. For a frame mounted jack I recommend part...
    view full answer...
  • Dimension of Wheels on Dutton-Lainson Easy Swivel Jack DL22580
    I can help you find the measurements you need on the Dutton-Lainson Easy Swivel Jack. I was able to go out to our warehouse and measure that the dimension from outside to outside of the wheels is 4-3/4 inches. There is also a bolt that connects the wheels to the jack that sticks out further than that wheels do, that measures 6-1/2 inches from end to end. I have attached a few images to better show you what I mean. I have also linked a video demo for you to check out.
    view full answer...
    Image 1 for Image 2 for
  • Is the Pull Pin Easy Swivel Trailer Jack DL22580 Strong Enough For A 4000lb Trailer?
    The Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels - Sidewind - 1,500 lbs. # DL22580 you were looking is designed to fit trailer tongues that are up to 3" wide x 5" tall, so this will be perfect for the frame of your trailer. Since the only weight that affects a trailer jack is the tongue weight, and since you only have 450lbs of tongue weight this jack will be plenty strong as it has a 1500lb rating. In addition the dual wheels on the # DL22580 will be perfect for allowing you...
    view full answer...
  • Where is the Dutton-Lainson Model 3400 Jack Part # DL22300 Built
    This particular Dutton-Lainson jack is made in China. Some of their other jacks are U.S. built. The Dutton-Lainson Model 6800, part # DL22580 is built in the U.S.
    view full answer...
  • Swivel Marine Jacks Manufactured in the USA
    The Dutton-Lainson Swivel Marine Jacks are manufactured in the USA. These include the # DL22580 and the # DL22800 1500 lb swivel jacks. I've linked you to the rest of their selection.
    view full answer...

Do you have a question about this Trailer Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<