Result: 126

Okay, we can get your 2022 Hyundai Tucson set up with a 7-way so you can do some towing with a hitch that fits your vehicle, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT22MR. What you will need are a couple of parts; first the 4-flat, which…

Hey Patrick, the Curt trailer wiring harness part #C59496 that fits your 2025 Honda Pilot does not come with the correct fuses needed. Thankfully we had a customer come back and let us know what the required fuses are and they are a 30 amp m split…

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The differences between the between the Curt #C13149 and the Curt #C13406 for your 2017 Toyota RAV4 are that the 13149 has a visible crosstube and is rated for use with a weight distribution system while the 13406 has a concealed crosstube (for a…

Since your 2022 Tucson already has a 4-way connector you will need the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Hyundai…

I recommend using the Yakima Kayak Trailer for 5 Kayaks #Y24TR to transport your kayaks with your 2020 Jeep Wrangler Unlimited. The trailer will give you the ability to easily load and unload the kayaks from a manageable height. You will be able to…

Based on the numbers and RPM you listed on your Dutchman 2007 trailer the correct slide out motor setup you need is the part #LC125802 that is a Tuson High Speed 18:1 9,000 RPM slide out motor.

The keyless entry sensor on your 2016 Toyota RAV4 Hybrid is located under the rear bumper on the passenger side of the vehicle. The installation instructions for the Curt Trailer Hitch Receiver part #C13406 state to move this under the cross tube of…

I compared ground clearance measurements for all of the 2" trailer hitch receivers we have for your 2017 Toyota RAV4 and found that the Curt Trailer Hitch Receiver part #C13406 has a great clearance from the ground to the top of the hitch…

A complete weight distribution system applies an awful lot of torque to the hitch and tow vehicle it's being used on so some hitches simply aren't rated to handle this kind of stress. As you mentioned in your question this is the case for the…

The hitch for your 2018 Toyota Rav4 that has the best ground clearance is the Curt part #C13406 as it sits the highest and also because only the hitch opening hangs below the rear bumper which means turning into an elevation change like a steep…