Result: knobs

You simply turn the dial to set the gain and press the knob to activate the manual override. Using this brake controller is just as easy as turning on your windshield wipers or headlights. | Im shopping for a new brake controller...

This brake controller has a super small control knob that you can hide in the dash instead of a brick to hit your knee on. | Do you have a brake controller compatible with a 2019 Lincoln Nautilus? | Hey Gary, For your 2019...

I recommend using the Redarc Tow-Pro Elite # RED44FR for your 2019 Ford Transit T250 because it can be installed virtually anywhere and you only need access to the control knob which has a 3/4" diameter. The control knob uses different colors for the LED light on the knob to tell you what is going on so you don't have to try reading a screen plus it gives you have the ability to use either of the popular braking system modes; proportional and user-control (time-delayed). |

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

The controller is operated by a control knob that can be mounted anywhere within the driver's reach. | The brakes on my trailer suddenly stopped working. Being pulled with a 2016 Silverado 2500 HD with an integrated brake controller....

I get a little help by using the controller manual slide knob. Thinking its a bad controller, I installed a prodigy controller, same result, no brakes. | Has worked fine for almost 3 years with a Primus IQ controller, than...

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

The main unit of this brake controller mounts out of sight, so it won't take up additional space in the cab. Only the control knob will be visible in the vehicle. The knob controls the brake power and also acts as the manual override. |

On the other hand, the Tow-Pro Liberty will mount remotely, with the only visible portion of the controller being the control knob that can mount anywhere within the driver's reach. | I need a recommendation for a trailer brake...

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

Instead, you will want to use something like the Deka Lead Quick-Disconnect Battery Terminal part # DW05312 which allows you to disconnect the battery leads though the use of the hand knob. I have attached a video for you as well. |

This has a small dash mounted control knob which provides a clean appearance. You will need some additional Wire # 12-1-1 as well as a Circuit Breaker # PK54530 to provide power and ground connections for the brake controller....

This will allow you to quickly disconnect the battery leads through use of a hand knob. If you're interested in what you need for a complete flat towing setup, you'll also need: -A base plate # RM-523199-5. | What battery...

In order to test a brake controller you will first need to turn the power settings up to max, usually with a knob or buttons on the exterior of the unit. Once you have power at the max settings have a friend apply the manual override which is usually a bar or button on the exterior of the unit and then test the 1 o'clock pin on the 7-way. |

This will allow you to use a hand knob to disconnect the vehicle battery. The Lead Quick Disconnect is designed to fit top-post batteries on cars, light-duty trucks, farm equipment, RVs and ATVs. | So I have noticed that if...

You'll want to use butt connectors like the # DW05745-5 to make the connections to the existing wires and you can use one of your existing slots on the dash to install the knob that comes with the Liberty. If you don't already have a 7 way plug on your 2008 Hummer H3 you'll want to use the # ETBC7, which will provide you with the 7 way plug-in required for your trailer brakes and lights to operate. |

Otherwise, if you're needing to ADD 4-Way and 7-Way sockets then you need the following parts: - Curt T-Connector Vehicle Wiring Harness # C58DR - Universal Installation Kit # ETBC7 - No-Drill Mount Bracket, Long # 18136 - Extra 10 Gauge Wire # 10-1-1 (on an as-needed basis) If you also need a brake controller then I really like the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness # RED52VR because it can be installed virtually anywhere and the control knob doesn't take up much space. This will splice in to the wiring you ran for the ETBC7. |

You can then use the Universal Mounting Panel # 331-TPSI-001 to complete the installation and make the Redarc controller knob look like it was meant to be installed in your 4Runner. | Hi, I have the 3041-P wiring that I used...

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

Instead, I recommend using the RedArc Tow Pro Elite # RED44FR, which installs out of the way similarly to the Curt Spectrum and is also controlled by a knob installed on the dash. This controller provides responsive proportional braking for a towed trailer and because it can be installed pretty much anywhere, it's a great solution. |

The brakes are actuated and the output adjusted via a control knob that mounts on the dash within the driver's reach. | Ive got a 2017 Ford Expedition EL XLT VIN# 1FMJK1JT5HEA74389 that a long-time customer just purchased and...

I like this controller because it's hidden aside from the knob so you won't be using up any more room in your cab. | Im trying to find the OEM wiring harness for the vehicle end of the brake controller for a 2021 Ford f-53...