Result: knobs

The Replacement Topwind Red Knob Handle for etrailer Gooseneck Coupler # GCSQTW-30008-HD has a measurement of 10.5" from the center of the jack-adapter to the center of the handle knob. | Hi, how long is the...

I need a replacement knob for Item # e98878 will this fit. I called and they said that there is no replacement knob for my item but that this might fit. | I need a replacement knob for Item # e98878 will this...

What is the inside diameter of the HDKB-RED knob? Will it fit on a 1/2 inch shaft? | What is the inside diameter of the HDKB-RED knob? Will it fit on a 1/2 inch shaft? | The Replacement Red Claw Knob for Ram Topwind Jacks...

I have a sport crest 4 bike rack, two of the adjustment knobs are broken do you carry them? | I have a sport crest 4 bike rack, two of the adjustment knobs are broken do you carry them? | We sure do! You'll need part # 050045....

Hey John, sorry to hear about the knob of the etrailer anti-rattle device part # e38FV getting knocked off but we unfortunately do not have a version of this with a knob on the side. | I bought this product...

I am looking at Replacement Topwind Knob Handle for Ram Jacks Item # TJPB-HD. Can you tell me what the bolt size is on this? | I am looking at Replacement Topwind Knob Handle for Ram Jacks Item # TJPB-HD. Can you tell me what...

This is the tensioning knob for a 2trailer hitch. Its a funnel shaped plastic shell, part of a knob and long screw assembly used to grip the inside of a 2 hitch and prevent the bike rack from slipping out of the trailer hitch. |

question, can I leave it on the receiver and will the tightening knob stay on or should it be turned tight ??? I have it half tightened and im concerned with vibration it may come out ??? | I installed my etrailer adapter...

Or you can still pull it out even though the turn knob is on lock? | Hello, Once you turn the turn knob to lock the platform into place, can the auto-pin also lock itself? Or you can still pull it out even though the turn...

looking for a dash mounted trailer brake control for a 2019 ford explorer xlt with one small knob to mount in open slot next to my tow button and rear hitch release slot. | looking for a dash mounted trailer brake control for...

I went and measured the threaded section of the Replacement Sidewind Handle Knob for etrailer and Ram Swivel Marine Jacks # MJ-1000B-KB and found it was approximately 1/2". | How long is the threaded section of this part? |...

The overall length of the Replacement Topwind Handle w/ Claw Knob for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-HD is 10-1/2 inches. | How long is this handle? | The overall length of the Replacement Topwind Handle...

The knob can be placed wherever you have space in your Sienna, and while there isn't a custom mounting panel for the knob in your Sienna, there is the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001. |

We have a bunch of options available, but I think the best one is the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional # RED24CR. You will need to drill a small hole somewhere in the dash to mount the knob (see the included image of this controller knob mounted on a 2019 Grand Cherokee as an example), but it's worth it. |

Regarding the Redarc Tow-Pro Elite controller, where would you recommend that the knob be located in a 2020 Chevy Equinox with factory Tow package. | Regarding the Redarc Tow-Pro Elite controller, where would you recommend...

I went an pulled a Replacement Sidewind Handle Knob # MJ-1000B-KB from our warehouse and determined that I has 3/8 inch coarse threads. | What is the thread size for this handle grip ? Mine got busted off in an accident, I can...

Yes, the Replacement Black Claw Knob # HDKB-BLKF is for a 1/2" diameter jack handle. | Is part HDKB-BLKF for a 1/2” diameter jack handle? | Hello Kevin, thanks for reaching out. Yes, the Replacement Black Claw Knob # HDKB-BLKF...

The Replacement Topwind Black Knob Handle for Ram Jacks # TJPB-HD will measure right at 8 inches from the center of the clamp to the furthest most edge of the handle/knob. | What is the length from center...

| The hand knobs which secure the ramp to the etrailer Motorcycle Carrier part # e98873 are M10 bolts per the instructions. | I lost the 2 hand screw pins that secure the ramp to the rack. Could you provide the screw and thread...

When you put the collar on and enter the shank when the knob is on the bottom when you go to tighten it's just pulling the weight down and gravity is a great help, by putting the knob on the top when you go to tighten it will be pulling all of that weight up. |

If you check out the attached video of this controller being installed on a 2014 Jeep Grand Cherokee you can see that the control knob is actually mounted in the center console. Since the control knob doesn't have to be mounted in a specific orientation it really opens up the possibilities for installation. |

Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional is this all i would need for a 2019 f150. | Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional is this all...

I need a replacement hand knob the nut stripped out of the plastic part for Item # e98878 - the etrailer Kayak Carrier w/ Tie-Downs - J-Style - Folding - Clamp On. | I need a replacement hand knob the nut stripped out of the...

Both controllers use a small knob that can be mounted pretty much wherever it would be within the driver's reach. | I need a brake controler for my 2019 Audi Q5 SUV. I'm not sure which to choose between the Curt Spectrum or...