Result:

I need a tv propane gas detector. Model LP_DOB Part 31013 Serial PP00300190 | Hi Brenda, The Atwood 31013 unfortunately has been discontinued so you'd need to go with a completely new LP gas detector. We have a couple of surface mount style...

I need a propane detector for my 2017 Winnebago micro mini camp trailer the original Atwood propane detector went bad so I need a new one the numbers are PP00384842 33535E just curious what the replacement would be for this being dometic bought...

Since the Atwood 36681 is discontinued what would be the best replacement considering the size of the 36681 hole Im dealing with? | You could use the 2-wire Propane Gas and Carbon Monoxide Detector part # RS34FR in place of the Atwood 36681...

Not sure which replacement model to get. I have no clue the other numbers I found on mine are pp00276003 33535e Can you please help me | You can use the RV Propane Gas Detector # RS64FR (white) or # RS44FR (black) to replace your current Atwood...

What is the inside cubic feet or inches of this cargo holder? | The Replacement Pod for Rola Enclosed Cargo Carriers # 10188 for the Rola Swinging Enclosed Cargo Carrier, can hold a total of 13.5 cubic feet of gear. has an internal dimensions...

Will this be able to handle an empty 18 foot 10000 lbs rated trailer? It weighs approximately 2500-2900 lbs and has a 500 lbs tongue | Technically if your trailer has a tongue weight (TW) of 500 lbs then it falls into the 500 lb max TW rating...

It appears that this Pod DOES NOT include the swing away receiver mount. Do you offer it separately? part 10188? | Hey B, No, the Rola swing away cargo carrier has been discontinued for a bunch of years now, and there are none of the receiver...

Our 2018 Hideout travel trailer has an Atwood 35230A Propane gas detector in it. I dont see that one available, what would be the replacement? | Hi John; the RV Safe Propane Gas Detector is designed to replace old discontinued Atwood models....

Can this rack be modify to set lower on the roof? Height is a factor for me. | The Rackem Fitz-All Enclosed Trailer Ladder Rack # RA-28 does adjust horizontally to allow it to fit trailer roofs from 4-feet to 8-1/2-feet wide but its height is...

Just looking for a bag for a scag liberty z 48in model number, SMZL-48 | Hey Kyle, the correct Grass Catcher for your Scag Liberty Z48 is the part # RCMMS4-OBS1 that you referenced. |

I am looking for a replacement for my airstream propane detector Atwood model LP_DOB part 31013 In my research, I believe to have the older model 2.5 inch wide by 3 7/8 high, with replacement being 36720. Do you have an alternative. Curious...

replacement for RV Propane Gas Detector Model LP_DOB Part31013 | Hey Kathy, to replace your current Atwood 31013 propane detector, you can use the RV Propane Gas Detector # RS64FR. This detector measures 4-1/4" long x 2-5/8" wide x 1/2" thick,...

My tekonsha p3 will not power on. On the harness that plugs into the back of it I have +12V on the red wire and Ground on the Black wire. Should the +12 and Ground be reversed? | It sounds like you are hardwiring the Tekonsha Prodigy P3 Trailer...

Hi, I’m looking for a swivel mont jack that would work on a 6” y’all by 2” wide frame. Do you have anything like this? Thanks. | The only bolt-on swivel jack we have that works with 6" tall trailer frames is the Trailer Valet 5X Swivel Jack...

looking to replace an OLD propane detector in a pop up, This is the part I have that is old and not working see pictures looking at your Atwood 36720 RV Propane Gas Detector - 12V DC, White. Will this work? Im not worried about mounting/size...

I have 2026 F350 DRW l pull a 5th wheel will this effect the on board scale system | Hello John, thanks for reaching out, and congrats on the new truck. Yes, the Timbren Suspension Enhancement System # TFR350SDJ will affect the onboard scales...

I am looking for a side bagger for a husqvarna Z4219 mower. Do you have one that would fit this model? Thanks | Hello Mark. The correct grass catcher for your Husqvarna Z4219 is the Rack'Em Grass Catcher # RCMMS4-EXS1. This comes with the 4.4...

My gas detector is beeping. I’d like to replace it. The ones you suggest are not the same shape. Please help. I have the Protechtor series 2001 | Hey Anita, thanks for the information! The older Protechtor series 2001 propane detectors...

Hi. I have a Graber Outback 4 bike hitch rack. Women’s bikes don’t fit great. Also straps broken. Do you have any replacement parts? I can use for this rack? | Hello Scott. We do offer a few compatible replacement parts for the Graber Outback...

I need a replacement Atwood propane gas dector model LP DOB Part 31013 or a compatible that fits the 3103 wall bracket. I can send you a picture. | Hey Alan, you can use the RV Propane Gas Detector # RS64FR to replace your current Atwood 31013...

I need a grass catcher. I have a Torro atimecutter 42In. What model number will eork for me. And will I need to purchase anything elese to install. Thanks. Karl | Hey Karl, the correct Grass Catcher you'd need for your Toro Timecutter is the...

Hello - We have a 6x10 enclosed trailer that we haul our motorcycle in. We have two kayaks - 9.5 and 10.5 in length that we need to carry as well. This will be hauled behind a 32 foot Class C RV. With that in mind, wind resistance is less of...

I plan to replace an old Atwood LPCO 36636 detector with a RS54FR detector as you suggest . My detector has 2 red leads spliced together and then connected to an in-line fuse and then connected to power lead. Single black to common. Might...

I have bought the RVLP-2W to replace my LP-DOB Part 3103. The wires coming out of the old part are black and red. Do I attach black to black and red to red with butt connectors? Ive not ever done anything like this and Im very nervouse. Thank...