Result:

I need a tv propane gas detector. Model LP_DOB Part 31013 Serial PP00300190 | Hi Brenda, The Atwood 31013 unfortunately has been discontinued so you'd need to go with a completely new LP gas detector. We have a couple of surface mount style...

I need a propane detector for my 2017 Winnebago micro mini camp trailer the original Atwood propane detector went bad so I need a new one the numbers are PP00384842 33535E just curious what the replacement would be for this being dometic bought...

Since the Atwood 36681 is discontinued what would be the best replacement considering the size of the 36681 hole Im dealing with? | You could use the 2-wire Propane Gas and Carbon Monoxide Detector part # RS34FR in place of the Atwood 36681...

Not sure which replacement model to get. I have no clue the other numbers I found on mine are pp00276003 33535e Can you please help me | You can use the RV Propane Gas Detector # RS64FR (white) or # RS44FR (black) to replace your current Atwood...

Will this be able to handle an empty 18 foot 10000 lbs rated trailer? It weighs approximately 2500-2900 lbs and has a 500 lbs tongue | Technically if your trailer has a tongue weight (TW) of 500 lbs then it falls into the 500 lb max TW rating...

Our 2018 Hideout travel trailer has an Atwood 35230A Propane gas detector in it. I dont see that one available, what would be the replacement? | Hi John; the RV Safe Propane Gas Detector is designed to replace old discontinued Atwood models....

Can this rack be modify to set lower on the roof? Height is a factor for me. | The Rackem Fitz-All Enclosed Trailer Ladder Rack # RA-28 does adjust horizontally to allow it to fit trailer roofs from 4-feet to 8-1/2-feet wide but its height is...

Just looking for a bag for a scag liberty z 48in model number, SMZL-48 | Hey Kyle, the correct Grass Catcher for your Scag Liberty Z48 is the part # RCMMS4-OBS1 that you referenced. |

I am looking for a replacement for my airstream propane detector Atwood model LP_DOB part 31013 In my research, I believe to have the older model 2.5 inch wide by 3 7/8 high, with replacement being 36720. Do you have an alternative. Curious...

replacement for RV Propane Gas Detector Model LP_DOB Part31013 | Hey Kathy, to replace your current Atwood 31013 propane detector, you can use the RV Propane Gas Detector # RS64FR. This detector measures 4-1/4" long x 2-5/8" wide x 1/2" thick,...

Hi, I’m looking for a swivel mont jack that would work on a 6” y’all by 2” wide frame. Do you have anything like this? Thanks. | The only bolt-on swivel jack we have that works with 6" tall trailer frames is the Trailer Valet 5X Swivel Jack...

looking to replace an OLD propane detector in a pop up, This is the part I have that is old and not working see pictures looking at your Atwood 36720 RV Propane Gas Detector - 12V DC, White. Will this work? Im not worried about mounting/size...

I am looking for a side bagger for a husqvarna Z4219 mower. Do you have one that would fit this model? Thanks | Hello Mark. The correct grass catcher for your Husqvarna Z4219 is the Rack'Em Grass Catcher # RCMMS4-EXS1. This comes with the 4.4...

My gas detector is beeping. I’d like to replace it. The ones you suggest are not the same shape. Please help. I have the Protechtor series 2001 | Hey Anita, thanks for the information! The older Protechtor series 2001 propane detectors...

I need a replacement Atwood propane gas dector model LP DOB Part 31013 or a compatible that fits the 3103 wall bracket. I can send you a picture. | Hey Alan, you can use the RV Propane Gas Detector # RS64FR to replace your current Atwood 31013...

I need a grass catcher. I have a Torro atimecutter 42In. What model number will eork for me. And will I need to purchase anything elese to install. Thanks. Karl | Hey Karl, the correct Grass Catcher you'd need for your Toro Timecutter is the...

Hello - We have a 6x10 enclosed trailer that we haul our motorcycle in. We have two kayaks - 9.5 and 10.5 in length that we need to carry as well. This will be hauled behind a 32 foot Class C RV. With that in mind, wind resistance is less of...

I plan to replace an old Atwood LPCO 36636 detector with a RS54FR detector as you suggest . My detector has 2 red leads spliced together and then connected to an in-line fuse and then connected to power lead. Single black to common. Might...

I have bought the RVLP-2W to replace my LP-DOB Part 3103. The wires coming out of the old part are black and red. Do I attach black to black and red to red with butt connectors? Ive not ever done anything like this and Im very nervouse. Thank...

I need to replace a very old CCI Controls 7719 3-wire LP Alarm with solenoid valve control. My preference would be to simply bypass the valve control need to ensure the valve remains open and use any of the standard 2-wire detectors. Your...

Which grass catcher is required for a hustler raptor so year 2016 48 inch cut? | Hey Mark, you can use the Rack'em Multi-Mount Grass Catcher # RCMMS4-BS2 for the Hustler Raptor SD according to Rack Em. |

Can you put 12 wheels on this model? Lift handle. Thanks for the quick feedback and great customer support! | We have a really great option for a trailer for your 10 foot Bass Pro Pond Prowler boat, although the Malone trailer you mentioned...

I have a 2019 Grand design Imagine 2400bh. I am trying to replace the Atwood carbon monoxide detector PP00616644 33535e replacement. What do you recommend? Thx | Hi Doreen! We have been getting quite a few requests for this as it is getting...

I have a 2 in on my dolly but my trailer takes a 2 5/16. Could I use the 2in just moving around my driveway? | Yes, you can use a dolly like the # RA20 with a smaller hitch ball to move around a trailer that has a larger hitch ball. The trailer's...