Result: knobs

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

The main unit installs behind the dash so only the control knob is visible. The knob controls the brake power and acts as the manual override. | I have a 2017 Subaru outback premium with the 2.5 motor I want...

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

This set up is going to give you an outstanding combination of braking power with the EOH actuator and braking control with the easy-to-use knob of the Spectrum that will mount wherever is convenient for you. | Will this...

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

The main unit installs behind the dash so only the control knob is visible. This gives it an OEM look as well. | I would like to purchase disc brake kit HYD34VR, I have 2017 forestriver RV trailer with lippert dual 3500lbs...

I recommend the Redarc Tow-Pro Elite Brake Controller # RED44FR as it provides an easy too use control knob that takes up the least amount of space. With the Plug-and-Play Wiring Harness # RED39FR the installation process shouldn't take more than a few minutes to complete. |

All you will see is the adjustment/manual override knob. Which I like very much. The manual override feature on the knob will then allow you to engage the brakes while backing down a steep slope. | boat and...

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

The main unit installs out of sight with only the control knob visible in the cab. The wiring harness will plug directly into the tow port under the dash. | I have a 2021 diamond c 32’ trailer with drum brakes, I need to convert...

For this I recommend the Redarc Tow-Pro Liberty # RED24FR which plugs right into your OEM controller port with parts # 331-TPH-017 and # 3064-P, and then also gives you a clean looking installation since the only thing you need access to is the small control knob (see linked review video). |

Technically you could adjust the output voltage on any brake controller down to 6 or fewer volts (by adjusting the gain or power output knob) and it will work with the 6 volt brakes that you have without having to add any additional parts or a separate voltage regulator. |

In the future when you do need a trailer brake controller, I highly recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness part # RED63RR with Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob part # 331-TPSI-002. |

I have attached a picture to show the little hook/knob set-up. | My trailer light lens is marked J 2024 on the top portion of the lens cover and DOT ASTI 96 on the bottom of the lens cover. Can I just replace the bulb or do...

The only other thing you would need is a brake controller if your 2017 F-350 does not have one, and I highly recommend the the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with Plug-and-Play Wiring Harness # 331-TPH-007 because it is controlled with a knob that is both extremely easy to use and also keeps a bulky unit out of the cab of your truck. |

Its like they were designed to cover the front door knob of Ft. Knox?? But were spoiled - we still have a 2005 Arctic Fox truck camper, and several years ago when I replaced the incandescent bulbs with soft white LEDs, I removed the milk white lenses with only a soft squeeze and simply twisted the bulbs out and in. |

The Tow-Pro Elite also has a unique design in that the only part of it that you need access to is the small control knob. The brains of the unit can be mounted virtually anywhere you have room for it. | I am looking at converting...

The main unit installs behind the dash so only the knob is visible giving it an OEM look. | Hello, I have a 2019 6 x12 Cargo Mate single-axle cargo trailer without brakes. What do I need to install the brakes on it? The trailer...

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

When your Silverado 3500 owner's manual refers to the transfer case and its neutral position this refers not to the column shifter but to either a floor-mounted manual shifter or to the dash-mounted electronic transfer case control knob. Both will have 4WD high and low settings indicated by up or down arrows and both will have a neutral position. |

Finally, you will need a brake controller that is compatible with electric over hydraulic brakes if your 2017 Ford F-350 does not already have one, and for that I highly recommend the the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with Plug-and-Play Wiring Harness # 331-TPH-007 because it is controlled by just a knob that is both extremely easy to use and also keeps a bulky unit out of the cab of your truck. |

This can seamlessly switch from proportional to time-delayed while you are driving and has a small knob for controlling the unit which can be mounted almost anywhere. | Hi, I am doing the conversion because I need to activate...