Result: knobs

Or do I just convert it to a knob? | I have a boat trailer with a dico 60 hitch on it. Stamped on it states it fits 1 7/8” and 2” balls. I need a replacement latch, the part that grips the underside of the ball. Does the...

I have adjusted the adjustment knob out and the wheel spins freely but is still locking up. | Hello, the left front brake on a tandem axle is locking up when they brakes are applied. I have adjusted the adjustment knob out...

I currently have to manually turn a knob on the trailer when I back up to turn off the braking, Id like to convert that over to have this automatic if possible. | Good morning, I have a 1998 ranger 620 that is on a 1999 Wood/Ranger...

To loosen, we depress this lever and we can rotate the hand knob counterclockwise to loosen from the trailer ball. | To loosen, we depress this lever and we can rotate the hand knob counterclockwise to loosen from the trailer...

The Valley Coupler #5122 on my trailer had a knob adjuster. I cannot find a replacement kit with the knob adjustment. | The Valley Coupler #5122 on my trailer had a knob adjuster. I cannot find a replacement...

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | I’m looking for the window crank out assembly to open it. The threaded pin broke off inside. It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | Thanks for...

While we do not have the replacement locking knob you're needing for your ARKSEN bike rack we do have a wide variety of replacement bolts that we can help you with. | I have an ARKSEN hitch-mount bike rack, and a draw-tite...

How much do you tighten the adjuster knob once the ball is inside? | How much do you tighten the adjuster knob once the ball is inside? | The tightness needed for latching the Titan Zinc-Plated Brake Actuator # T43397007K to...

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

but I dont like the adjustable ball size turn knob... wondering if this product has the same bolt hole mounting so that I do not have to drill new holes in my trailer? | Im looking at this recommended via prior chat product Item...

This also installs really easily with the included brake controller harness but it only puts a small knob on your dash as well. | 2008 Nissan Frontier.. I installed an Etrailer hitch and 4 wire wiring harness several years ago....

But personally, I am not a huge fan of the tightening knob on the Titan actuator. If I was replacing an older Atwood, I would go with the Dexter DX7.5 Drop-N-Go. | I need a replacement actuator. Present one is Atwood MPD 85778...

This proportional brake controller can mount anywhere out of the way in your vehicle so it won't take up space. The control knob mounts in the dash for easy adjustment. Pressing on the knob activates the manual override and it uses a colored LED for diagnostics. |

I need a replacement bolt that lifts the claw inside a hitch coupler, screw tight with a knob style | I need a replacement bolt that lifts the claw inside a hitch coupler, screw tight with a knob style | Hey, Mike. Based off...

The other option we have for you is the Titan Coupler part # T2343400 which has the same multi-fit knob as the Fulton but the manufacturer does state will work with a 50mm hitch ball as well as a 1-7/8" or 2" hitch ball. |...

Hey Gary, since you wouldn't have a ton of room to mount a brake controller on your Harley I would go with the Redarc Tow Pro Liberty part # RED52VR which only requires putting a small knob on the "dash" of your bike. Now for brake assemblies I would need to verify what spindles you have on the trailer. |

It may be a lever or a knob that has to be turned. Some require a dual action move where you would push back or forward on the lever while lifting up on it. | How do u uncouple an ez trailer we just bought a used one can not...

The Redarc Tow-Pro Elite Brake Controller # RED44FR is compatible with EOH brakes and can actuate brakes on up to 3 axles. The control knob takes up minimal space and provides a factory look and with the plug-and-play wire harness # 331-TPH-010 install will be fast and easy. |

It is clear to me that something inside the brake controller after instalation that usually face you up must be leveled I guess to a horizontal position to make the controller work the right way. Using the knob level, When do you know the brake controller is in the correct level position? |

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...