Search: chocks > Wheel Chocks > Andersen x > Erickson x > Rabbit x >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi David, The Furrion Vision S+ Wireless RV Backup System part #FR39DF signal and range strength is tested for up to 100ft at high speeds and extended range of up to 492 ft in open spaces. So, you'll have a stable and reliable connection from…
view full answer...Hey Ben, thanks for reaching out! The PullRite OEX SuperLite #PUL89ZR is what I recommend over the B&W Companion #BWRVK3305. The Companion has been a staple in the towing industry for a long time, but the OEX has a few key advantages that make it…
view full answer...Hey Suzanne. I highly recommend chocking both sides of your 2025 Alliance Avenue. This will ensure you don't have any creeping or shifting of your 5th wheel trailer while you're going in and out. This is especially important on uneven ground…
view full answer...Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…
view full answer...Hey Ellis, yes the Durabilt safety chain connector part #DU96MR would work on your Ford F-350 as well as the safety chain you have too. Typically the pins just get hammered into place but a bearing press would also work. What method did you try to…
view full answer...The FasTen RV Leveling Blocks w/ Carrying Handle #CAM44512 can definitely be used to help jack up your travel trailer but then you'll want to add some chocks like part #FHG97ZR on either side of your tires to help ensure your trailer won't…
view full answer...We offer 3/8-inch diameter Replacement Snapper Pin #JFC-PN whose measurements are noted in the photo I linked for you. This item matches the original; I confirmed by going to our warehouse and measuring the pin included with your Husky Super Brute…
view full answer...My contact at Atwood recommended using a pin at least 3/8 in diameter and 2-3/4 inches long. I'd recommend using a snapper pin, part #JFC-PN which has those dimensions.
view full answer...My contact at Curt Manufacturing advised that they do not offer the replacement Wire Lock Lynch Pins (shown as part number 10 in their instructions, which are linked) that secure their TruTrack's trunnion bars at the head end but he said…
view full answer...I went out to the warehouse and pulled Pins and Thumb Clips #EQ95-01-9415 to measure them for you. The diameter is 3/8 of an inch. The usable length is just under 2-1/2 inches (2.45 inches). And the opening is 2.46 inches by 1.5 inches.
view full answer...We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…
view full answer...Hello Bill, thanks for reaching out. Yes, we do offer a replacement monitor for the TST TPMS. Take a look at the following: - Color Monitor for TST TPMS Systems #TST-507-D-C This will work with any of the TST-507 model TPMS and works with both the…
view full answer...Filters
- 8 results
Vehicle Fit
Filters
