Result: toggle switch

Hi James! The Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long #UCL90CB will indeed stick underneath your camper. You will want to make sure the surface you are sticking it to is as clean as possible for the best adhesion (I…

I have an option for you, but I spoke to my contact at Bulldog to try and get a replacement cross shaft for you and he said they are not available. He said that you will just need to get a 12 inch long section of 1 inch cold rolled steel and then…

The correct hub/drum for a Dexter 4,000 Lb Axle is the Dexter Trailer Hub and Drum Assembly part #K08-426-91. Then for the brakes, you can use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-468-469. The hubs/drums for a 3,500 lb axle are…

Hey Joe, welcome back! With a 35" wheelbase the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR is the correct fit. I verified your Reflection has 6k axles on the Grand Design parts site so the #APUBR-8 is also correct and so is…

Hello Mike, thanks for getting in touch. For a hitch for your 2025 Honda CR-V EX FWD I recommend the etrailer Class 3 Hitch #e98848. This hitch has a 3,500 lb towing capacity and 525 lb tongue weight capacity, so plenty for your Kompact Kamp tent…

To use the 25K etrailer Square Gooseneck Companion Jack #TJD-25100 at the front of your TopHat trailer you just need the following parts: - Connecting Rod #LG-XTB - Sidewind Crank #TJD-12000-HD We don't have a bracket for the connecting rod but…

We do have a nice selection of Dexter axles currently available, however we do not currently carry the specific off-road axles that are used on the Thor TAB Outback models that you referenced in your question. Another option to consider is an…

That does not match anything we offer since the pins aren't centered. The best option we have would be a new 2-way for the female and male sides to replace what you have with #337TC1012 and #PK12800.

Hello Kevin, thanks for reaching out. I am sorry to say we do not offer an air distribution box to go with that. Main reason being what you have is an older AC unit that uses the now discontinued r410a refrigerant. The new RV AC units and…

What you have appears to be the same size door latch as what the #PLR5115 fits. I'd recommend verifying that the cutout hole on your door is 4-5/8" long x 3-3/8" but this was designed to fit the standard door cutouts like yours appears…

Hello Doug. The Bauer Products Motorhome Door Lock #BA64FR is definitely going to be your best bet for replacing the latch on your horse trailer door. This latch is made to fit a 5-1/4" wide x 4-1/2" tall cutout. With your hole being only…

Hello Dave, thanks for reaching out. It is possible to replace a 6,000 lb leaf spring with a 7,000 lb spring, as long as the eye-to-eye length is the same. It will not necessarily increase the carrying capacity of your trailer, since the axles are…