Result: 30 amp plug

The Tekonsha kit part #22119 has 3 fused connectors, 2 30-amp and 1 25-amp. The instructions in the kit and the videos you made do not show that 25-amp wire being used, at least I havent seen or read anything about it. So, do I need to use...

I did purchase the wiring option for the vehicle trailer option . it included the cable to attach to the rear plug in the well . the lights do not work . My toyota dealer says I need a relay and 30 amp fuse in addition . they want to sell me...

For the Highlander Hybrid, the battery is not under the hood it is in the back. Where should we connect the wires and breakers from the ETBC7 kit. Thanks | Instead of extending the black wire from the 7-Way plug in 7-way upgrade kit part #...

I purchased this kit for my 2013 Highlander. It comes with a 10 amp fuse for the fuse box. When I open the fuse box, it indicates it should be a 30 amp fuse. What size fuse should I use? | The 10 amp fuse that is included with the Curt T-Connector...

Hi, I have a 2015 Toyota Highlander LE Plus that comes with the tow package all Canadian model have it installed. I looked at this wire harness kit and view the walktrough video to install. The tech mention this harness kit is max out at...

This Curt wiring harness comes with 10A fuses, which at 12V would supply 120 watts to the trailer. I noticed that the Toyota factory harness supplies a 30A fuse which supplies 360 watts. Can 30A fuses be used with the Curt harness to provide...

Hello, I’ve been following your installation video for the Universal Installation kit and the Tow-Pro Elite for 2018 and 2019 Toyota Highlander for my 2020 Highlander gen. 4. They are very helpful, thank you! Your installers recommended...

I just tried to plug this in to my 2021 Highlander XSE and when I tested it, there was nothing. I checked the 30 amp fuse under the hood and it seemed ok. Anything else I should try? Thanks | The # TK74FR that fits your 2021 Toyota Highlander...

I need a 2005 Highlander to 7 pin Bargman type plug @ trailer. I know the Highlander is a factory 4 pin and I will need a 30 amp wire from battery as well as fuse and a connector for the 3 wires going to trailer Do you make such a kit or know...

I purchased a C56217 for my 2016 Toyota Hylander and installed it no problem. I connected the 4 point harness to a 7point. It appears that the running lights do not come on, when I turn the switch to lights on. The turn lights, flashers,...

I hooked this up and it does not seem to work. I verified the ground and I have a signal going to the converter under the dash but no signal on the other side where the second harness plugs in. Someone in the comments mentioned an in-line fuse?...

Hi. I have a question regarding use of the proper fuse amperage on my 2019 Toyota Highlander for the towing harness kit I installed. Ive installed a Curt for hitch as well as the Curt flat 4 pin wire harness kit. The kit has a 10 amp fuse to...

A 10 amp comes with the C56217 to go under the hood in the vehicle fuse panel BUT the car owners manual and the info on the fuse panel called for a 30 amp fuse for towing. Is the 10amp fuse sufficient? | Yes, the 10 amp fuse that comes...

2017 Toyota Highlander, V6, 5K tow rating, will be towing 17foot Casita travel trailer, 2650 dry weight, single axle. Question, the ETBC7 wiring diagram shows 20/30A breaker on hot lead to break controller and 40A hot lead to trailer battery....

Hello, I own a Toyota Highlander and want to convert my already installed 4 way flat plug to a 7 pin. Have looked at videos and your kits ETBC7 and ETBCL kits and dont believe I need all that but do need to know the following. If I plan...

Want to install the RED52VR on my 2017 Highlander which has factory hitch and 4 pin wiring in place. Need to add the 7 pin and all the necessary hardware but not sure which kit to purchase. The video mentions a 40 amp and a 20 amp breakers...

Installation was easy, but it does not matter since it does not work. Is the 10-amp a shortcut of some sort, or will it only work once I put in the 30 amp fuse? The trailer lights work, as I connected to my truck to make sure it was my highlander....

Is there a way to dim the lights from the watchdog? It shines right through our trailers window even with the shades closed. | Hey Sean, The Hughes Autoformers Adhesive Dimmer Shade # HU28VR is exactly what you need. This shade just has a...

I think I know the answer, but wanted confirmation from the experts: if I am installing the #ETBC7 on a 2014 Toyota Highlander the video is GREAT by the way, but plan on using the Curt Echo #C51180 Bluetooth-enabled brake controller, I can just...

Ive reviewed the information on the website regarding the Echo controller and have some questions: - Id like to buy a 2019 Toyota Highlander LE plus AWD V6. Its my understanding that this has a tow prep package and is rated to tow 5000...

I have a 2022 Toyota Highlander with tow package, is there a custom wiring harness available for connecting the RED44FR brake controller to the vehicle wiring harness? | You can install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR...

Hello, After looking at the factory wiring diagram on the 2010 Highlander, why cant I: • Use the Curt 56217 connected in the front and back like normal. • Use a 7 pole multi tow adapter at rear of vehicle. • Run a blue wire only from the...

I installed this harness on my 2008 Toyota Highlander. The fuse supplied with kit for the vehicle under hood fuse box is 10a. My owners manual shows the Trailer Lights/Towing fuse size to be 30a. Am I to use the 10a fuse in order to protect...

I have a new v6 2010 highlander with a tow package .It has a 4pin connecter .I need to connect a brake cotroll that requires a 7 pin connecter .Is this possible ??.Thanks | Installing a Brake Controller on your Highlander is certainly possible....