Best Trailer Hitch Receiver for a 1999 Buick LeSabre
Manufaturer and model of you least expesive towing hitch [or a link] for my 1999 Buick LeSabre. Thank you! | We currently only have one trailer hitch receiver for your 1999 Buick LeSabre which is the Draw-Tite Trailer Hitch Receiver part #...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Recommendations for Cutting the Garnish for a Ventline Roof Vent
I must shorten the leg length of two garnishes by about 3/4inch but before I start cutting, I would like to be sure I am using the best technique and tool before I ruin a new garnish. Please give me your expert advice. | I would measure the...
Best Trailer Hitch for a 1998 Buick LeSabre
what is your return policy | Simply include a copy of the return authorization email from our Customer Service team with your return, and wrap the package securely. Clearly mark on the outside of your package the RGA number. For your protection,...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
What is the Lug Nut Torque Specs for etrailer 3.5K Idler Hub Assembly?
Recommendation for lug nut torque with these hubs? | Hey Harold, thanks for reaching out! The lug nut torque specs for the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K will vary depending on what your wheel size...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Is it Safe for 4-Way Trailer Plug to be Installed Permanently Near my Hitch Receiver?
You sold me wiring and lights for my trailer. I view your firm as experts in your field. With that, I have question. I had a local U Haul company install the wiring for a trailer hitch under my 2000 Buick Lesabre attached to the hitch exposing...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Will the Kuat Dirtbag Work With the Saris Traps Fork-Block Bike Carrier Base
Will the Kuta Dirtbag work with the Saris Traps? | Yes, the Kuat Dirtbag Bike Rack's like part # DRT15X110 and part # DRT9P will work with the Saris Traps Fork-Block Bike Carrier Base part # SATRK33. I have attached a few photos to show the...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Replacement Shroud for a 13,500 BTU Dometic Quick Cool A/C
Looking for a replacement shroud for my 2002, 13500btu dometic quick cool a/c unit. measures 34.5 x30 do you have anything like that? | From what I could find on your 13,500 BTU Dometic Quick Cool it is a Brisk Air. The Replacement RV Air Conditioner...
Can the Valterra ABS Water Tank Be Installed Over an Open Space Without Supports
The size is ok but i dont want it on the roof lol. Gravity fed only, no electric pump ? That doesnt sound right. And also, Can it be supported by laying it flat 16x24 between pieces of angle iron by the edges only, open bottom under the floor?...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
Complete Towing Set up For 2005 Buick LeSabre
I’m looking for a complete kit that will include everything need to pull a trailer. I read a previous comment saying I needed an additional wire harness for the trailer lights. Seeing how I’m not sure what exact parts I need I would like to...
Ground Clearance of a 2004 Buick LeSabre with a Draw Tite Hitch Installed
for 2004 buick lesabre what is the ground clearance for the class II hitch? | I don't have an exact figure I can give you, but I can help you determine a close approximation of what the ground clearance your 2004 Buick LeSabre will have after...
Recommended Trailer Hitch and Wiring for 2005 Buick LeSabre
trlaler kit kit in | It sounds like you might be looking for a complete kit to set up your 2005 Buick LeSabre to tow a trailer. Starting with the trailer hitch, the Curt Class II Trailer Hitch # C12044 that you were looking at is confirmed...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Flat 4-Pole Wiring Harness for 2003 Buick LeSabre
Hi can you please tell me what I need? I have a 2003 Buick Lesabre and want to install a standard 4 flat wiring plug so I can pull a small utility trailer thats all. Do I need anything more than just the 4 flat plug. It will not need any electrical...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Troubleshooting Ramp Door Spring Not Opening Properly After Snapping Cable with Reinstall
had a cable come off. Got new cable on reattached and tightened spring. door opens about a 1 1/2 and stops?? | Sounds like the torsion spring of your ramp door assist hasn't been wound properly and that's why the door isn't opening properly....
Parts Needed to Carry a Motorized Chair with a 2005 Buick LeSabre
I am trying to find a bar and hitch to carry a motorized chair | Out of the available trailer hitch receiver options for your 2005 Buick LeSabre I recommend installing the Draw-Tite Trailer Hitch Receiver # 36309 which is a Class II with a 1-1/4...
Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross
I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |
Availability of 14" Trailer Tire with Positive Offset
Looking for a 14 trailer wheel that has a ton of positive offset, the one I have has the lugs almost even with the front lip so the tire is very tucked in. 14 - 5x4 1/2 I think its 6 wide or maybe 6.5 | The offset wheels we have for a 14"...
Filter Your Search
Contact and Help