Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle
I have a 2008 Flagstaff camper with two Alko axles. It is in need of new brakes/drums. Ive attached a photo of the plate attached to the front axle. Could you reference me to the proper parts, drums and brakes, including seals and dust caps...
Troubleshooting Curt Trutrac System Digging Into Brackets
I recently purchased the Curt Trutrac WD C17501 for my 2004 Ford Excursion towing a 39ft travel trailer. The tongue weight loaded is around 1100 lb. The RV dealership installed the weight distribution on my trailer and set it up but after driving...
Slide-In Camper Tie-Down Kit to Fit a 1990 Toyota Pickup
Do you have a Torqlift frame mount solution for a 1990 Toyota Deluxe Pickup? I have a lightweight old Roamin Chariot slide-in camper and am having trouble visualizing how to attach the front tiedowns to the frame without using straps. Thanks...
Function of Center Pin on a 7-Way Trailer Connector
Etrailer 7 way trailer wiring diagram illustrates the center pole as auxiliary orange while the trailer color codes lists Back Up lights purple and no mention of auxiliary orange. Please explain the center pole. Also is 12volt red/ black the...
Recommended Air Bags for a 2005 Ford Econoline 350 w/ a V10
I have a 2005 Ford Econoline 350 with V10. It has a 3 inch lift. Do you have any rear air suspension products that would work with the lift. I want to tow with it and I am a huge fan of of the rear suspension airbag systems. | Hey Russell, we...
Will My Tow Bar Cross Bar Work with a Roadmaster Base Plate Kit # 317-2 on a 1997 Nissan Pickup
I have tow bar assembly for 91 nissan and the frame horn brackets are different on my 97. will the bracket that holds the the tow bar itself match the 97 frame brackets,Bob sorry it took so long to get back to you. The 91 nissan pickup parts...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
What is Max Amperage Draw of Bulldog Winch Light Duty On-Board Air Compressor
What is the maximum amp draw of this compressor? | Hey Michael, the Bulldog Winch Light Duty On-Board Air Compressor # BDW46TJ draws at max just under 40 amps. |
Does Detail K2 Summit Plow Fit 1987 Nissan Truck without Modification
Will this fit on a 1987 Nissan 4wd pick up? I see mounting kit KK286610 is recommended. is this a direct fit mount or will I have to make modifications to the truck? Is this bolt on or will it require welding? | The K2 plow setup you referenced...
What Rack System Can I Use On My 2002 Ford Excursion With Factory Side Tracks
Will this fit the factory tracks of a 2002 ford excursion? | Great question, Dave! After some double checking I can confirm that Rhino Rack part # Y02-480B-NT will work on the factory tracks on the roof of your 2002 Ford Excursion. What are...
Can SumoSprings be Used to Replace an Air Bag Kit on a 1987 Toyota Truck?
Will your part number: SS79PV be able to replace my leaking airbags on the rear axle of my 1987 Toyota 2-WD pickup truck motorhome and take some load off of the rear leaf springs, even at-rest? | Hey Don! The SumoSprings Custom Helper Springs...
Looking For A Shocker Hitch For My 2003 Ford Excursion Pulling A 7k Trailer
I am interested in a shocker hitch. I have a 2003 ford excursion, 7.3 l diesel with 4 wheel drive. I primarily pull a RV that weighs 7,000 lbs. What model do you recommend? thanks | Hey Patrick, The Shocker Hitch # SHK47VR would be a solid...
Looking For Replacement Weather Stripping For Lift Gate On 2003 Ford Excursion
I need to replace the weather stripping for the lift gate on my 2003 Ford Excursion and the OEM Part 2C7Z-78404A06-AA has been discontinued. I have been searching junk yards and the internet for something that might work. Might you have something...
Troubleshooting Wiring on a 1990 Toyota Pickup While Installing Curt # C55379 Harness
I have a 1990 toyota pickup, and an old trailer with just the 2 lights in the back. I bought the C55379 converter and connected everything as per the instructions. I dont have turn signals or brake lights, Ive checked the grounds and they are...
Dexter Disc Brake Kit Fit for a 2008 Road Runner 1500 Triple 7K Axle Boat Trailer
Im trying to confirm if a kit is compatible for the trailer I have. Its a 2008 road runner model 1500 boat trailer with three 7k dexter axles and has a hydrastar hba-10 actuator. Will the disc brake conversion kit K71-694-695-12 fit this? The...
What To Do When The Air Lift Air Bag Helper Spring Fails During a RV Trip?
I have the 5000 Air Lift series bags on my 2WD Ford Excursion, and during the beginning of our three month RV trip the passenger side will not hold air. Troubleshooting my a local mechanic indicates bag is damaged. What recourse do I have while...
Availability of License Plate Bracket to Attach to Westing SureStep Bumper
To Whom It May Concern, Do you sell the license plate lens for the following bumper. Westin Fey Surestep Rear Bumper with Custom Installation Kit - Black Powder Coated Steel Item # 61001-95700 If so what is the part number and if not can...
Troubleshooting Open Ground Warning on P3 with Known Solid Ground Connection
I have the Prodigy P3 installed on my 2003 Excursion 6.0L diesel using the 3035-P adapter. Intermittently I get the Open Ground No Brakes warning message. No trailer connected. I checked the batteries negative terminal to chassis in the engine...
Will Westin Fey Surestep Rear Bumper Fit a 1985 Toyota 1 Ton Pickup
Hello, just want to make sure this will fit my 1985 Toyota 1 ton, long bed 2 WD pickup truck. I ordered one from ebay and it was supposed to fit but did not. Please see attached pics. Bolt holes on truck are 3 inches on center, FYI. | Hey...
Will The Replacement Mounting Bracket for Kodiak Disc Brake Caliper Fit My Truck
will these parts fit my 1994 nissan truck. kcmb82bd or kcmb10rd. why Im converting form drum to disc in rear. | Hey, Lee. This bracket is designed for trailer axles and trailer brake configurations. We wouldn't recommend to use the replacement...
4-Way Recommendation for 1981 Toyota Truck
I have a 1981 Toyota truck and want a vehicle 4 pole wiring harness. What one can I get, there probably is not a plug and play one? Maybe a universal one. Thank you Gary | Hey Gary, yeah a universal 4-way kit like the Curt # C59236 would be...
Recommended Replacement Hydraulic Pump Motor for a Lippert Leveling System
is the 172911 the replacement for 414850 on a Lippert leveling systems? | Tan, it actually looks like the Replacement Hydraulic Pump Motor for Lippert RV Leveling Systems # LC57AF is the correct replacement for your Lippert 414850. To get...
Recommended Factory Replacement Hitch for a 2000 Ford Excursion
2000 Ford Excursion with towing package. The current Ford hitch has an electrical connection in a steel frame to the left of the hitch. I don't see that on the CURT 14011 Class 4 Trailer Hitch. Do I have to remove the current electrical connection...
Compatibility of LED Turn Signal on 1994 Toyota SR5 Pickup
Are LED Load Resisters required in order to replace the stock 1156 turn signal bulbs with this LED bulb? | The 1141/1156 LED Bulb - Single Contact Bayonet - Directional - 19 Diode - 145 Lumens - Daylight White # DG52533VP will work to replace...
Filter Your Search
Contact and Help