Search: Electric Leveling Jacks   >   Trailer Tires and Wheels   >  

The main difference between a ST205/75-14 size tire like the Contender #AC14R45SM and a ST215/75-14 size tire like the Taskmaster Provider Item #TTWTR21514 is that the larger number is a slightly larger size. The 205 has a section width of…

Yes, we have checked with Lippert in the past and their Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 is compatible with boxed frame RVs like your 2019 Outdoors RV Backcountry series Model 23KTS.

There's no reason you'd have to remove your old stabilizers when installing the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 unless they were in the way of where these need to install, but in…

The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System part #LC672136 is designed for trailers with a GVWR of up to 10,000 lbs. I cant comment on fit for any specific make/model but the universal design will allow it to…

In order to test the controller on the Lippert Ground Control 3.0 Electric Leveling System you'll first need to obtain a multimeter. Once you have this then you will need to use the ground probe and place that on the green wire coming from…

The Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 referenced in your question is a great landing gear system that features dual electric jacks that will raise and lower at just the flip of a switch. The jacks themselves can operate…

I reached out to my contact at Lippert regarding the issue you're having with the Level-Up Hydraulic System on your trailer/RV. He said the symptoms you described are likely due to a faulty touch pad, but there is one thing he wants you to check…

Typically when the Quick Level Touch Pad #LC74FR red light flashes it indicates an error and the retract button flashing green it means that the error has been reset. The issue appears to be on the extending, so it's possible that there's…

Wiring connections for the Electric Over Hydraulic Brake Actuator are as follows. Yellow - Cold side of breakaway switch, The wire that goes hot when a breakaway occurs. Black - Positive connection on breakaway switch, The wire that charges the…

First thing you will need to do is check that all of the wiring of the actuator and your brake controller are correct. I attached a couple diagrams that should be helpful I spoke with my contact at Dexter and there is a way to troubleshoot your…

I can only make a guess and can't know for certain, but generally speaking, the two main reasons that lug nuts shear off is that they are overtightened - though you can rule that out if you are sure they were torqued to the manufacturer's…

If you measured the stud size on your hub and drum assembly and they measured 1/2 inch then they may work with the Dexter Trailer Hub and Drum Assembly #8-219-4UC3-EZ, which also uses 1/2 inch wheel studs. The fact they are both 1/2" does not…