Search: Hitch Covers   >   TPMS Sensor   >  

Hi Tom, The Saris MHS Bike Rack for 1 Bike #SAR23MR weighs approximately 67lbs and has an 80lb bike capacity. The overall length from the hitch pin hole to the furthest point on the rack is approximately 27". If you need any other info just let…

I checked the reviews on the Curt Trailer Hitch Receiver #C13397 product page and we have had a number of customers install the hitch on the 2023 and 2024 CR-V Hybrid (including the Sport), and it does fit. We also installed the #C13397 on a hybrid…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, there is a trailer hitch receiver that fits your 2024 Mazda 3 Hatchback, from Curt, at the following part number: - Curt Trailer Hitch Receiver #C98BR I verified this fit directly with the manufacturer for you

The Draw-Tite #36598 will install onto a 2021 Jeep Compass without modification to the rear bumper or fascia. You will need to remove some caulk from the frame and bend the exhaust hanger brackets a little to get it to fit, however. We do have this…

I went to our warehouse to pull the Curt combo bar #E-9 to provide some measurements. And yes, the Curt combo bar #E-9 will have an internal dimension of 2-inches x 2-inches and outer dimension of the shank is 2-1/2 inches x 2-1/2 inches. The forged…

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is the direct replacement for your Magnatek 7345 model. If you want to replace the converter and the circuit breaker box then the Progressive Dynamics Mighty…

There are a few ways to determine if you have LED lights on your 2023 Kia Telluride. The easiest is to grab a friend or family member and have them apply the brakes while you watch. If you have multiple bright lights that come on immediately that…

The Furrion Chill HE RV Air Conditioner System #FR52PR can pull approximately 3,500 watts for a brief second during start up, which would be right at 29.67 amps.

The AMPLock #AMP37FR is designed to fit on 2" receivers, so it will work on your 2020 Ford F-150's factory receiver. This hitch pin has a 2-13/16" span.

Yes, to install the Draw-Tite Sportframe Trailer Hitch Receiver #24984 on your 2023 Mazda 3 you will need to remove that panel and it won't be put back into place. Hitch instructions only mention this when the hitch either prevents the panel…

Yes, the Roadmaster spare carrier part #RM-195125 that you referenced will work in the hitch of a 2020 Ford E-450 Class C motorhome.