Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...If you are just looking to tow a trailer with lights and without brakes, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56349. This will give you a 4-Pole flat on the back of the Tacoma to tow a…
view full answer...We have 7-way jacketed wiring with the Deka Wiring part #DW04914-1 sold by the foot which you could use to run all new 7-way wiring but you'd have to run individual wires to each circuit/light which a lot of people use a junction box like the…
view full answer...The Equal-i-zer weight distribution systems aren't RV specific. The correct system for your needs will depend on the fully loaded and ready to tow tongue weight of your Travel Trailer (which will include the weight of any cargo stowed in the tow…
view full answer...We can definitely help install a brake controller on your 2018 Honda Odyssey that does not have the factory tow package. You'll first need to have a 4-way installed if you do not already. For that you'd want the #118781 which is custom fit so…
view full answer...The trailer wiring harness you would need based on what you were able to find is the Tekonsha kit part #118781 which I attached an install video for on a 2018 Honda Odyssey just like yours.
view full answer...The towing capacity for hitches and the vehicles they fit are oftentimes going to be different. For example, your 2018 Honda Odyssey has a 3,000 lb towing capacity but the etrailer #e98855 Class III hitch has a capacity of 3,500 lbs. This is what the…
view full answer...When it comes to a hitch and coupler lock Set for a Demco hitch on your 2022 Airstream 25 foot Globetrotter The etrailer Hitch and Coupler Lock Set - 2 inch Hitch - 2-5/16 inch Ball #e68ZR will work unless you have a double-walled hitch or a factory…
view full answer...For what you are looking for the most ideal setup will be one that has more sidewall than the 17.5 inch wheel setup you referenced as the more sidewall you have the more the footprint can easily expand when aired down. So going with a 16 inch wheel…
view full answer...The B and W Slider hitch that will fit the Reese fifth wheel rails you have installed in your truck bed is the B and W Patriot part #BWRVK3270 which is a confirmed fit and designed for that style of fifth wheel rail.
view full answer...To drop the front of the pin box and thus lower the front of the fifth wheel, you'd need to RAISE the pin box, not lower it. Lowering the pin box would raise the height of the fifth wheel at the front. If you have an available set of holes at the…
view full answer...The Furrion Vision S side camera kit #FCE48TASL is designed to be wired to your RV's running light circuit. If wired to the turn signal circuit, they would not work properly. Marker lights, including the ones that come in this kit, do not have a…
view full answer...Related Searches
Filter Your Search
Contact and Help