Keep your devices charged no matter where you are with this 10-watt monocrystalline solar panel. Can be conveniently clipped to your backpack and features a kickstand to support itself in multiple angles to face the sun.A (7.5W max) Rated power: 10W Cell type: monocrystalline Dimensions: Unfolded: 9-1/2" wide x 14-1/2" tall x 3/4" thick Folded: 9-1/2" wide x 7-1/4" tall x 1-1/4" thick Weight
This portable 200-watt solar charging system lets you place the solar panel where you need it for maximum sunlight. Helps extend your off-grid campout if you have moderate energy demands, like powering a few lights, a fan, and charging devices. x 4-1/16" wide x 1-1/8" tall Solar panel rated power: 200 watts Solar controller maximum power rating: 240 watts for 12V systems 480 watts for 24V systems Amperage: Solar panel output: 10
Keep your devices charged no matter where you are with this 10-watt monocrystalline solar panel. Conveniently clips to backpacks and features a kick-stand to support itself at multiple angles to face the sun. Includes Venture 35 battery pack.: Nomad 10: USB Port: 5V, up to 1.5A (7.5W max) Cell type: monocrystalline Unfolded dimensions : 9-1/2" tall x 14-1/2" wide x 3/4" thick Folded dimensions: 9-1/2" x 7-3/16" x
The only option we have for your cab/chassis is the Reese Low Profile 5th Wheel Trailer Hitch, part #RP30054. This hitch has a 30,000-lb gross towing capacity. Installation of this hitch requires it to be installed directly through a 1/2 inch steel…
The LM67000LA is a Timken part number for a bearing cone with a 1.250" I.D. and a 2.328" O.D. This is the same as our bearing part #LM67048. The LM67010 is a Timken part number for a race with a 2.328" O.D. that matches our part…
The Kodiak #K2R1258L12 Disc Brake Kit is compatible with a 12K Dexter axle with a 7-bolt brake mounting flange. Your current wheels/hubs should have an 8 on 6-1/2 inch bolt pattern. You'll also need an electric over hydraulic brake actuator, a…
Above-bed hitches are installed on rails that remain in the bed of your truck even when the hitch is not in use. With below-bed hitches, the installation equipment is installed beneath the truck bed, so the fifth wheel hitch simply drops into the…
The spring with the black cable drum should always be mounted to your LEFT, standing on the inside of the trailer looking out. This is very important for proper operation. Dual spring systems, like #ERS160D96, have a red-coned and a black-coned…
Yes, based on the measurements you took of your hub bore diameter the correct Bearing Buddy Bearing Protectors is the part #BB2441 or #BB2441T-SS for the stainless steel model that will resist any corrosion. These are designed to fit hub bore…
The Dexter 8-201 hub and drums use 12 x 2 inch brake assemblies. You can verify this by measuring your drums as shown in the attached picture. I recommend #AKEBRK-7-SA electric brake assemblies. Both the left and right hand brakes are included and…
The Tandem Axle Trailer Fenders - Double Radius - Steel - 14" to 15" Wheels - Qty 2 #HP94VR are 65" long x 9" wide x 15" tall and they are designed to work with 33 to 35 inch on center axle spacing.
In the USA a tandem axle utility trailer with a gross vehicle weight rating (GVWR) of 7500-lbs should have brakes installed. Any trailer over 3000-lbs must have brakes on all wheels in most states, but laws do vary. Some states require braked axles…
I do have an option for you but all of our trailer wheels with a 5 on 4-3/4" bolt pattern are 15" diameter like the Provider ST205/75R15 Radial Trailer Tire w/ 15" White Spoke Wheel part #A15R475WS. This combo measures 27"…
Filter Results
