!V70  x   >   Paneloc  x   >  

What is the spacing for the mount holes? | The mounting holes for the Paneloc Slam Latch # F709-104Z are spaced 1-7/8" apart horizontally and 1-3/8" apart vertically. Those measurements are taken center hole to center hole at you can see in...

Heyo I have an enclosed trailer woth ramp door. Im trying to add more security and would like to figure out a way to latch the ramp door closed from the inside. I found some heavy duty Hasps. That may work. Is there a product made for that....

Hi, Do you have this Item # F720-182Z105 in stainless steel. | Yes we do. We have the # F720-282U108 which is the exact same latch as what you referenced except in stainless steel. |

i have a 2000 pace arrow enclosed trailer and i need a new latch for the side door the latch that the bar goes in to put a padlock on it | You need a sliding bolt door latch with lock. We do not have that exact item. the closest thing we can...

I see u have spring latches that have a 5/8 diameter, any luck u have 3/4? | We sure do! There are two different spring latches offered with a 3/4" diameter pin. The Paneloc Heavy Duty Spring Latch # F784-102Z which has a mounting bracket that...

F784-102Z Is there a left and right option? Thank you! | Nope. The Spring Latch # F784-102Z you were looking at is not designed for either side, you just rotate it one way for being on the right side, and flip it 180 degrees to use it on the...

I just bought a 2002 snow bear utility trailer and it is missing the left side spring loaded hitch pin. This trailer has a 2 x2 metal housing attached to the tail gate. Is there a replacement hitch pin i can buy? Thanks | There is an option...

I need a L and R hand all stainless latch small, 1/4inch to 3/8 bolt | We have exactly what you are looking for with 2 different styles. The Paneloc 2" long x 1-1/8" wide Heavy Duty Spring Latch Left Hand # F719-282U and Right Hand # F719-272U...

I have an old trailer that has two lost pins on each side. Never let your brother in law borrow your trailer... They were 1/2 inch by about 4 inches. There was a retaining clip that held them onto the arms and the pins went into the trailer...

Paneloc Enclosed Trailer Parts - F707-104Z. Is this latch Stainless Steel? | The Paneloc 1-1/2" x 1-1/4" Slam Latch # F707-104Z that you referenced does come in a stainless steel option but this particular model is a zinc plated steel. For...

I have a 2016 StarCraft Launch ultra lite. I need to re place the 2 storage compartment latches. The locks do not lock. They keyed the same as the entry door. Entry door locked come fine. Having trouble finding the correct latch on your web...

I want to replace the entire RV doors on my unit. I want to use the Slam latch doors but need to know where I can get them and if they can be made to a certain size. Im on vacation so I will monitor my emails. Just point me in the right direction....

What is the measurement of the latch handle from curve to end of the handle | The pin handle of the Paneloc Heavy Duty Spring Latch # F779-204U234 is roughly 2", and the overall length of the pin is 5-7/8". I've attached a link to a review...

Can you provide some dimensions? Like overall length of pin. Projection of pin in open position. Projection in closed dimension. I would like to use this but only have 5inch of space. | The overall length of the pin of the Paneloc Spring...

Do you have a replacement lock I can buy? | Regarding your SportRack Vista XL # SR7018 roof top cargo box. On further correspondence we discussed that not only do you need a key and lock cylinder core, but you also need the housing and latch...

Im looking for a spring-loaded bolt that holds ramp in place. About 2 inches long. Threaded with a center rod that spring-loaded | Sounds like you are looking for the Spring Latch w/ Holdback for Trailer Tailgate # F719-172Z105 which is a 2...

I am wondering if I can use this latch to hold drawers closed in my work van. The latch would be mounted on the front of the drawer with the pin going sideways into the side of the cabinet. I would like to know if you have a strike plate I can...

This latch says its for the right side. Do they make a left side to match it or do you just use this same latch for the left side? thank for any help you can give me. | We do have a left hand side version of the Paneloc Spring Latch part # F785-104Z...

Is there a striker plate available? | The Paneloc Slam Latch part # F707-104Z011 was not designed to work with a striker plate so there isn't one available for it. |

do you sell a keeper for a panaloc spring lock ? | The Paneloc Heavy Duty Spring Latch, # F720-172Z105, is not sold with a separate keeper. The Paneloc Slam Latch with Cover - 2" Long x 1-5/8" Wide - Stainless Steel, # F708-204P011, does come...

I want to add a door latch to my cargo trailer side door. The door itself is 1 inch thick. However, the inside lip of the door frame where Id want the latch to catch is 1 inch deeper further away from exterior of door. Would you suggest a...

Hello, I am having a difficult time trying to find the correct latching pin for a trailer tailgate. The overall dimensions is 5-3/4 long. The pin extension is 2-3/16. The existing bracket is approx 2-3/4 long. The bolt seems to be approximately...

Is this lock available in an option that is configured in the reverse direction? I want the taper on the top side rather than the bottom side. Paneloc Slam Latch with Cover - 2inch Long x 1-5/8inch Wide - Stainless Steel Item # F708-204P011...

Does this latch have a left hand version? I need both. | Yes, the Paneloc Heavy Duty Spring Latch is offered in both right hand part # F719-272U and left hand part # F719-282U. The brackets are 2" long x 1-1/8" wide, have a 3/8" diameter pin,...