Availability of Heavy Duty Spring Latch With 3/4" Pin

Question

Question:

I see u have spring latches that have a 5/8 diameter, any luck u have 3/4?

asked by: Tyson O

0

Expert Reply:

We sure do!

There are two different spring latches offered with a 3/4" diameter pin. The Paneloc Heavy Duty Spring Latch # F784-102Z which has a mounting bracket that measures 3" long x 1" wide x 1-1/2" tall, or the # 788-S-ZINC which has a mounting bracket that measures 4-1/8" long x 3" wide.

I recommend measuring the size of the area you have to mount the spring latch to so you can best choose the correct option for your needs.

I included videos for both of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hello Arturo, Yes, the Master Lock Hitch Receiver and Coupler Latch Lock Set - Swivel Design - 2" Hitches #1481DAT will be a great fit for your Demco #DM15945. Good idea to keep things locked up and secure in the world we live in today. Any fun…

view full answer...

Answer 3

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Answer 4

We don't have exactly what you are looking for. The #PLR1904-Z you referenced is 3-1/8 inch without the strap. The best other option is the Ramp Door Hinge - Steel #PLR1902 which utilizes as different hinge style and welds flat. It is 4 inches…

view full answer...

Answer 5

The amount of space needed is going to vary depending on the spring that you use. If you use the Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs #TTRA1702, those springs are only 2-3/4" tall so you can get away with…

view full answer...

Answer 6

Thanks for the pictures! To replace your Dexter 13-143 equalizers you will want the E-Z Flex Equalizers item #K71-655-00. This is the exact replacement to your equalizes. They have an identical 7-3/4" bolt hole to bolt hole dimension.

view full answer...

Answer 7

The closest option we have to replace your Atwood 82543 actuator is part #DM72VR. However, it doesn't have the lockout like your Atwood does. To add a lockout use #T4748800 but it's an electric lockout unlike the Atwood's manual lockout.…

view full answer...

Answer 8

I spoke with my contact at Dexter and he said the 21-37 oil cap is obsolete and was replaced with the 21-36 oil cap, #RG04-270. This cap includes the o-ring and plug.

view full answer...

Availability of Heavy Duty Spring Latch With 3/4" Pin

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching