!Stampede Travel Trailer  x   >   !Grand Vitara  x   >   !Real-Lite Mini TT Toy Hauler  x   >   Patriot Hitches  x   >  

Do you have or can you make a hitch 16 inch male by female | Hello David, are you looking for a Patriot Hitches Adjustable Drop Hitch Receiver Adapter in a 16" drop? If so, I am afraid the 11" drop # PH67SR is the largest they make. If you...

I am carrying a stand up jet ski on a hitch carrier at the back of my truck. I want to use a riser to raise it a bit, to avoid potential dragging when going in/out of driveways. A /riser like this would work, but it says it is for flat towing...

interested in a hitch adapter to lower the tow angle by 4-6. I think the dual hitch receiver adapter item #RM-077-6 would work but I dont need two receivers. Do you have a part that lowers with just one receiver? | I have the perfect thing!...

Are Patriot hitches made in the USA? | The Patriot Hitch adjustable drop hitches like the # PH54FR you're asking about are proudly made in the USA, in Ohio. I've linked to a product demonstration video featuring the # PH54FR drop hitch. |

I need a hitch that will at least 6inch and then raise up to a 1 or 2inch . Its for flat towing a vehicle behind my motorhome. The Patriot hitch looks perfect but it says its not for use in flat towing or tow bars. Do you have such a product...

101001 Patriot Hitches General Rod-Ops Adjustable Rise/ hitch. In the video the guy mentioned a chart on your site that shows the decrease in towable and tongue weight this hitch can handle once you adjust it. But I cannot find this chart. |...

Hi, I have a dual motorcycle carrier that attaches to the tow receiver of my SUV. My current carrier sits high on the my SUV since it was also designed for lower vehicles not to drag. Im looking to lower this setup with an adjustable hitch....

Hello, Can you recommend an adjustable drop hitch to be used with my camper and associated WDH gear? My toy hauler with motorcycle is approximately 6500lbs. Vohn | First Vohn, if you can tell me what weight distribution hitch you are using...

I have an off road trailer that I tow with my jeep. I use a anti-sway setup when on the road. It uses a 2 receiver to attach to my vehicle. My problem I need to tow my trailer with my 02 Dakota, but the hitch level is too low. I need to raise...

looking to purchase a Blue Ox Hitch Receiver Immobilizer II - 2inch Hitches Item # BX88224 to use with PH54FR patriot hitches which i will also purchase if it will work with my Subaru Ascent factory mounted hitch which is located in the bumper....

Hi, I have a 2018 dodge challenger I already installed a hitch but now I need a riser of at least 10. I am looking at this one item # ph67sr. My only concern is if it will clear past the bumper on my car. | You will want to measure the distance...

Can you kindly advise what is the wall thickness of the square tube. It looks like it is 1/8 inch but I am not sure. Thanks in advance. | The thickness of the wall of the 7,000 lb-rated Patriot Hitches Adjustable Drop Hitch Receiver Adapter...

What is the tongue weight rating on Adjustable Hitch Receiver Adapter - 2 Hitches - 11 Rise/ - 7,000 lbs Do you have it in 2 1/2” size for a bigger truck. Kind Regards | The Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 11" Rise/Drop...

I have a Roadmaster Sterling tow bar. I tow a Honda Fit, which is extremely low. Will this work for me? | To lower your hitch height when flat towing your Honda Fit , I recommend using the Roadmaster High-Low Adapter - 2" Hitches - 10-1/4" Rise/Drop...

Hello, I have a question. I have a 2012 Ram 1500 Express 4 wheel drive with rear exhaust. I have a trailer hichmounted cargo tray that comes straight out of the hitch receiver. The problem Im having is since the exhaust goes straight out the...

Hi, We have a 25 foot class c motor coach with a two inch hitch. Our coach has a slide out the back so we need a two bike tilt away rack that is tough enough to hold up. We would like to tilt with bikes on so not sure if we should use a hang...

I am looking for a two bike hitch mount bike rack that will keep the bikes low to the ground. I have a 2017 F350 and installed an aftermarket bumper which has an integrated hitch reciever 2 inch . Because it is part of the bumper and not...

I installed my hitch on my 2015 venza. I have 10.5 inches of clearance un-weighted . I will be installing a rack and 2 bikes next. Seems low. ? | The 2015 Venza doesn't sit particularly high so 10-1/2" of clearance with the # 75663 installed...

I cannot understand the bolts and how to put the cotter pins on. It seems to require superhuman strength. | Yeah, I hear you. The cotter pins when they're new are extremely difficult to get in and out of the pins. You're going to have to keep...

Do you sell the 10,000 lb Verizon of this hitch? I dont see it on your website | The Patriot Hitches Adjustable Drop Hitch Receiver Adapter # PH67SR in the 7,000lb capacity is the only capacity we currently carry. For 10,000lbs from Patriot...

I have a 2010 dodge grand caravan sxt. The hitch has 675 tongue weight. Im looking for a 6 inch rise capable of supporting a 70 pound hitch and s 400 pound wheel chair. Can you help. | The Patriot Hitches Adjustable Drop Hitch Receiver Adapter...

what is the length of the section coming off of the receiver that has the gusset on it? | I am not totally sure what dimension you are looking for, are you asking about the length of the shank section that fits into the vehicle hitch or are...

While trying to pully friend out of a ditch, I found myself wondering about the reliability of a hook point that we all use regularly, but never seem to truly use. Most pickup comes with a factory class IV hitch, and we know that the receiver...

My truck has a sizeable lift, so to make it possible to get a dirtbike up the ramp I would need to have the receiver much lower, 8-10 inches. I see the Patriot adapter Item # PH54FR. Would something like this be safe to use with this? Would...