Search: Universal Receiver Hitch   >   RV and Camper Hitch   >   Frame Mount Hitch  x   >   Ultra-Fab Products  x   >  

To replace your GloBrite 126 marker lights you can use the #MC44RB. These lights are 2-wire incandescent lights measuring 4" long by 1-1/2" wide (same as your existing marker lights) and will work great for your trailer.

The Andersen Camper Wheel Chock #AM3604 that you mentioned typically does a really nice job of staying in place when driving onto them but depending on the type of ground surface you're dealing with they can still move around a bit. If you are…

The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" #41946 is a confirmed fit for your 2005 Chevy Express van but the measurements are correct. This hitch does require drilling to install rounding out the…

I contacted Lippert and they are not able to tell which motor you need based off of the fifth wheel model however, I can tell you where to look for the serial number of the slide out. If the slide out is a through frame the arms may have a tag with…

Your truck bed would not need to be lifted to install the Curt gooseneck hitch part #C607-604 that you referenced. We had the chance to install this on a very similar 2011 Chevy Silverado as yours and we did not have to lift or remove the bed. Check…

The #AT91367 will not work with your Atwood OD-5001 water heater. Like you mentioned, the replacement boards have been discontinued, so really the only option we can offer is a new water heater. I fully realize it's not what you are wanting to…

I would be happy to help you with that. I went out to the warehouse and took some measurements of the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065. The distance between the two wings on the top outside edge of the hitch…

The Buyers Products Hitch Plate with 2" Receiver Tube - Ford #3371809060A will fit Ford models F350/F450/F550 but is designed for the cab and chassis models so if you have the regular pickup bed this may not work and you'll want to consult…

I wasn't able to find much about your Magnetek 6345 power converter but I was able to find out that it has a max 45 amp draw and is rated for AC/DC use which both match the Progressive Dynamics 4000 Series Inteli-Power Converter #PD4045KA. It is…

The Curt #C15803 you referenced is only a fit for 2014-2018 Ram trucks so that isn't the correct fit. Because you have a 34 inch frame, I recommend the Buyers Products Class 5 Service Body Hitch Receiver - 2-1/2" #3373018538 which measures…

For your Ford F-53 chassis I recommend taking a look at the Draw-Tite Multi-Fit Trailer Hitch #5350. This is an adjustable hitch specifically designed for applications like yours as it can fit frame widths that measure between 24 and 46 inches. It…

Yes, we do have those kits. The kit 6212 that you referenced is part #SM99666 on our site. The kit 6237 that you referenced is a combination of parts #SM99226 and #SM99625 on our site.