Result: etbc7 kit

Hey Joseph. For your client to add a 7-way connector to their 2024 Subaru Outback Wilderness, they'll need our Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that…

Hey Suzie. To add a 7-Way connector to a 4th generation Toyota Sienna you'll need a 4-way wiring harness like item #C53VV and the Universal Installation Kit item #ETBC7. There is no custom fit 7-way harness and you have to have a 4-way harness…

Hi Larry, I can definitely understand your frustration, and based on your testing, that low voltage at the 7-way is not normal and does point to an issue on the truck side rather than the trailers. Also, thank you for your photo. The good news is you…

Hello Joe, Since your 2005 Ford F-150 already has the 4 flat wiring, you will need to build on top of that by installing the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires #ETBC7. To install the…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Roger, thanks for all of the information. The Redarc Tow-Pro Trail Brake Controller w/ Custom Harness item #RED44UR is going to be a great option for your 2024 F-150. It checks all the boxes for what you're requiring now and down the road.…

Hey Joel, thanks for reaching out. For starters, the class 4 hitch for the 2024 Ford Transit T250 is the Curt #C14012. As far as wiring, we do have a plug-in option for a 4-flat. Then we have a kit to upgrade that to a 7-way and add your brake…

There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…

Hi Zach! We do have wiring for your 2025 Volvo XC90 and the Oris Trailer Hitch with Detachable Hitch Receiver - Custom Fit - 2" #TS76VR does include a plate for mounting it as well. They call it a socket mounting plate in the instructions. You…

Hey Bryan, welcome back. For a professional install the etrailer Invisible Base Plate Kit item #e66GV takes right at 3 hours. For a DIY install closer to 6 hours depending on experience level and access to a lift. Most of the front end and some of…

The Curt Spectrum Trailer Brake Controller part #C51170 can be installed on your 2020 Land Rover Discovery. You will need the Universal Installation Kit for Trailer Brake Controller part #ETBC7 and the ZCI Circuit Protected Vehicle Wiring Harness w/…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…