Search: echo brake controller > RV Light Fixtures >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…
view full answer...The Replacement Motor for Stromberg Carlson Electric Landing Gear Set part #LG-196308 should work in place of your Atwood 70079 Landing Gear Motor. I cannot confirm this as Atwood Landing Gear parts have been discontinued for some time so there is no…
view full answer...There is a couple things you can try to get your Husky Brute 4500 Working again. If the light are coming on and the switch is just clicking you would need to check the star washers on your ground. Remove the ground wire from the frame and scrape the…
view full answer...Since you have already tested the switch and found it to be defective it will need to be replaced. The original part is no longer available, but could potentially be sourced through an electonics supply store. If the jack has more problems and must…
view full answer...The best ball mount that will give you 5 inches of rise is the Brophy Ball Mount #EA60. This ball mount is made from solid aluminum, which means no welded-on parts that can create weak spots, and also means it isn't going to corrode like steel…
view full answer...If your 2001 Ford F-150 has the factory 4-Way flat trailer connector then you can use harness #118242 to add a 7-Way. Once plugged in in place of the 4-Way harness and after the included relays and fuses are installed then it will be fully functional…
view full answer...I looked up the bolt and nut sizes that come with the Curt weight distribution system part #C17062 and the sizes you need are 3/4", 1-1/8", 1-7/8", and 9/16".
view full answer...Curt does offer a Class V hitch that is a confirmed fit for your 2006 Chevy Silverado 1500 HD as the part #C15323 but the part #C15302 is not listed as a fit so it's not the hitch you'll want. I attached an install video for this hitch on a…
view full answer...To ensure you have enough towing capacity with your 2010 Chevy Silverado 1500 I'd recommend a Class IV hitch like the Curt #14301 as the Class III hitches for your truck are limited to 6,000 lb total trailer weight.
view full answer...There are 2 different size bolts used for the installation of the Curt Class lV hitch, part #14301 on a 2010 Silverado 1500. The installation 4 carriage bolts that are 1/2-13 x 1 3/4, and also 2 hex bolts that are M14-2 x 40mm long. If you are…
view full answer...That is the only way you'd be able to install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 on your 2023 Ford Transit T350 since there is no custom fit wiring harness. To install this, you'll first need to find the cold side of the…
view full answer...Unfortunately the Lippert Screen Door Slider Panel with Push-Down Knob Opener #LC239061 does not come in a taller size. We do have a similar option that is 12" x 12" with the Lippert Motor Home Entry Screen Door Bubble Slider Panel…
view full answer...Filters
- 14 results
Vehicle Fit
Filters
