Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…
view full answer...The Trailer Valet 5X #STC-V211 has a silver/grey powder-coat finish that in some light and on certain screens can appear darker. The appearance will vary depending on how the photography was done and on the size and type of viewing device (PC…
view full answer...First of all, thank you very much for your service, and thank you for providing an entertaining read. Using a tow dolly instead of your current trailer jack will definitely help make moving your loaded boat trailer much easier. We do have options…
view full answer...The Trailer Valet MV PRO Trailer Dolly #TV96FR is their all new dolly and is listed under their Products/Trailer Movers. This is going to be overkill for your Lance 1685 since the dolly is rated for trailers up to 12,000lbs and your Lance is going to…
view full answer...The service plan for the Galeo Pro part #GA94FR is offered in three time frames currently: Monthly/yearly/3-year service available from Galeo at $1.99/$19.99/$49.99.
view full answer...The piece shown in the photo you provided is a stabilizer bracket that Trailer Valet has discontinued. Trailer Valet tells me that using a mounting bracket like #TVXLMB would provide more stability, and would be their recommendation.
view full answer...The Trailer Valet part #TVXL2 actually does pretty well on gravel. It has tires designed for handling gravel as long as it's not too deep and loose. If you fast-forward to the 2:03 mark of the video I attached you can see our demo guys using the…
view full answer...You wouldn't want to try and move a trailer up an incline with the MT70881. The dolly itself would be fine but you would most likely not be able to pull that heavy of a trailer up an incline. And then if you somehow did get it going up the…
view full answer...Some factory OEM brake controllers are compatible only with electric drum trailer brakes and will not operate properly with an electric-over-hydraulic (EOH) trailer braking system. Other controllers may have the flexibility to work with both types…
view full answer...As long as the THNN wire is copper and the proper gauge for what you are wiring on your trailer you can use it. I have attached a helpful article that explains wiring a trailer and the minimum required wire gauges. We recommend at least 10 gauge wire…
view full answer...Your 2021 Keystone Cougar Half-Ton 30RKD has a dry hitch weight of 955lbs which is over the maximum weight allowed for the Trailer Valet RVR9 #TVRVR9. You may be able to utilize the Trailer Valet XL Trailer Dolly #TVXL25 as long as the tongue weight…
view full answer...Yes, the etrailer brake assembly part #AKEBRK-7R-SA would work to replace a Dexter 023-327-00 which is a passenger side self adjusting brake assembly. The matching left hand side would be the part #AKEBRK-7L-SA.
view full answer...Filter Your Search
Contact and Help