Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Trailer Wiring Recommendation for a 2008 Infiniti EX35
Hello guys, I recently bought a trailer hitch from you guys and I cant wait to start towing my camping equipment I have a 2008 Infiniti ex35 and I have some questions about the trailer wiring harness. Not as it comes from factory it does not...
Which is the Smallest Roof Mounted Cargo Box that will Fit 2010 Infinit EX35 with Factory Crossbars
My 2010 Infiniti EX 35 has factory crossrails that are approx 20 center to center. I was wanting a shorter box. Will any Yakima or Thule box mount directly. If no, I dont mind drilling new holes in the box if it can sit correctly on the rails....
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Availability of Hitch for 2006 Mercedes R500
Does this fit a 2006 Mercedes R500? | We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements...
Will the Thule Pulse XL Roof Cargo Box Fit on the Factory Crossbars on a 2011 Mercedes R350
Hi, I am planning to purchase the Mercedes Benz Basic Roof Rackinch for my 2011 R350. I would like a roof cargo carrier that will work with the Mercedes Benz rack. Will this box fit on the MB Basic Roof Rack?inch The MB Roof Rack has a channel...
Trailer Hitch Receiver Recommendation for 2011 Infinity EX35
Hi, looking for a hitch for my 2011 Infinity EX35. Infinity says towing not recommended. Looking to tow a 2500lbs boat? What hitch would you recommend? thanks | You are correct, Infinity does not recommend trailer towing due to the added stress...
Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI
Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...
Hitch and Trailer Wiring Recommendation for a 2011 Infiniti EX35 Journey
Please help me with part numbers for a hitch and wiring harness for a 2011 infinite EX35 | For a hitch for your 2011 Infiniti EX35 you would want the Curt hitch part # C11510 as long as you have a Journey model. The recommended trailer wiring...
Wiring Kit Compatible with 2011 Mercedes-Benz R-Class
Hi, I reviewed questions and eTrailer expert answers related to an R class hitch installation. The thread below caused a bit of confusion: https://www.etrailer.com/question-117319.html. My 2011 should be electrically the same as the 2012 model...
How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer
I HAVE A 1979 AVION TRAVEL TRALER WITH 4 SEPERATE AXELS. THE SPINDEL IS BENT ON THE RIGHT FRONT AXEL, THEREFOR WEARING MY TIRE DOWN WITHIN 3,000 MILES. DO YOU HAVE ANY IDEA WERE I MIGHT PURCHASE AN AXEL? THANK YOU | In order to determine which...
Can a 4-Bike Platform Bike Rack be Used on a 1-1/4 Inch Trailer Hitch on a 2011 Mercedes R350
I have a 2011 Mercedes R350 with a 1-1/4 inch hitch. the label on the OEM hitch states that the car has a 280 pound tongue weight. Can I use the Yakima holdup 2 rack with 1-1/4 inch hitch and add to it the Yakima holdup +2 2 bike add on? ...
How Does the Curt Class I Trailer Hitch # 11510 Install on a 2012 Infiniti EX35
Hi, Could you email me the installation instructions? Id like to see whats involved and the difficulty level before ordering the unit. Many thanks! | I have attached a link to the installation instructions for the Curt Class I Trailer Hitch,...
Curt Hitch and Rola Bike Rack Recommendation for a Infiniti EX35
I have a 2011 Infiniti EX35 and Im looking at either getting a back rack like this or getting a hitch mounted bike rack. I dont have a hitch on the vehicle, so I would have to get that in addition to a hitch mounted bike rack. In the notes on...
Trailer Hitch For A 2009 Mercedes-Benz R350
Hello, I was wondering if part #C13190 will fit a 2009 Mercedes r350? Thanks in advance for responding! | We do have a trailer hitch option for your 2009 Mercedes-Benz R350, but the # C13190 that you mentioned is not going to fit your vehicle....
Required Bike Rack Stabilizing Strap For CURT Hitch # 11510 on a 2011 Infiniti EX-35
where do I get the stabilizing straps necessary to support a bike rack? | The strap you will need is the CURT bike rack strap with cambuckle, part # 18050. CURT requires using a stabilizing strap with any hitch mounted bike rack or hitch accessories....
Solution for Carrying 95 lb E-Bike
I have an e-Cells ebike that weighs about 95 lbs. What rack will be adequate for it? I have a MB R500. | The highest rated e-bike rack we can only carry up to an 80 lb e-bike. We do not have anything aside from motorcycle carriers like the etrailer...
Torque Specifications to Install the Curt Hitch Receiver C13103 on a 2009 Mercedes-Benz R-Class
The torque setting was not in my instructions. What is the correct torque for the # C13103? | The M10 x 1.50 CL 10.9 fasteners will need to be torqued down to 45 lbs-ft and the 7/16" 59 lb-ft for the Curt Trailer Hitch Receiver # C13103. This...
Is There a 2 Hitch Reciever Available for the 2010 Infiniti EX35
Id like a 2 receiver for my 2010 ex35. Is that possible? Its only for my bike carrier. | I have a solution for you, but there are no 2" hitches available for your 2010 Infiniti EX35 and even if you used a hitch adapter like the Brophy # HTAD...
Bike Rack Recommendations for a 2008 Infiniti EX35
What would you suggest fr my EX35 that can accomodate 2 bikes | We have several 2-bike trunk mount bike racks that will fit your 2008 Infiniti EX35. However, if the vehicle has a rear spoiler there are no trunk mount options that will fit. Without...
Filter Your Search
Contact and Help