Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
What Diameter Hitch Pin Is Designed for 2 inch Curt Hitch
What is the required diameter of the hitch pin to fit this hitch receiver? | Hey Paul, the Curt hitch part # C13098 was designed to be used with the standard hitch pin diameter for 2 inch hitches 5/8 inch like the part # PC3. |
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Wiring Needed to Install Tekonsha Prodigy P2 Brake Controller on 1996 Isuzu Trooper
Dear Customer Support, I purchased from you 7pin ETBC7 kit for my Isuzu Trooper 1996 and as I am starting to lay everything out, i realized this kit is for the standard trailer config and not the RV trailer, which has a different wire color...
Solution for Installing Trailer Wiring on a Vehicle with Separate Turn Signals from Brake Lights
I have a 1995 isuzu trooper. The previous own wired in a trailer brake control and a 7 way connector. None of the lights and or brake controller were wired in correctly, I rewired the brake controller and the 7 way connector so now I have trailer...
Do the Yakima Replacement Bolts Come w/ Nuts?
Do the Yakima 2 1/4 bolts come with the nuts to tighten on the ski rack, bike rack etc.? | Thanks for the picture! The Yakima Replacement Bolts - 1/4" x 2-1/4" item # Y80011 do not come with nuts. However, judging by the parts you have in your...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Where Does a Trailer Wiring Harness Install on a 2001 Isuzu Tropper
Do I have to remove the wheel well or tail light to find the plug in? | Trailer wiring harness # C55339 installs in a factory wiring harness located on the driver's side of the back of your 2001 Isuzu Trooper. The factory harness should be attached...
Surco Safari Rack 5.0 Rooftop Cargo Basket Recommendation for 1994 Isuzu Trooper
Can the Surco Safari Rack 5.0 Rooftop Cargo Basket SP S4550-1101 fit a 1994 Isuzu Trooper with Factory rails front to back? See attached pic. Thanks! | There is a Surco Safari roof rack option that I can recommend for your 1994 Isuzu Trooper...
Does Draw Tite #65004 Front Mount Receiver Fit 2001 Isuzu Trooper LTD?
Hello, I just was given the part# 65004 for a Draw Tite Front Mount Receiver for my 2001 Isuzu Trooper LTD. The mounting instructions says that is for Isuzu Hombre. Could you verify if this receiver is a front mount receiver and will for sure...
Location of Vehicle Side Connection Point for Trailer Wiring Harness Installation 1994 Isuzu Trooper
looked, removed bumper but i can not locate the harness to attach to my trailer, which by the way a 4 flat. i have a 1994 isuzu trooper | According to Tow Ready, the connection point is located underneath your 1994 Isuzu Trooper on the driver...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Troubleshooting Trailer Connector Not Functioning Properly
My trailer connector is not working properly. Harness is properly plugged in and properly wired. Sometimes it works well, but most of the time, it doesnt. Either the left or the right turn fail to light. It happens with both connectors, the...
Recommended Trailer Hitch Receiver For 2002 Isuzu Trooper To Install Yourself
Hi, I was wondering if i had to get this welded on. I have a 2002 izuzu trooper and i want to tow a jet ski for now. Possibly 2 at a time. Is this an easy personal install or do i have to take it to a welder/body shop to get it installed? Your...
Bearing Buddies for a Bearing with 1.625 Inner Diameter on a Motorcycle Trailer
Im restoring a 3 rail motorcycle trailer and the last step is repacking the bearings. Id like to get some bearing buddies or sealed type of applicator so I dont have to mess with repacking the bearings, but Im having problems finding something...
Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI
Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...
Filter Your Search
Contact and Help