Hitch And Bike Rack For Carrying Two Lectric XP4 Ebikes On A 2016 Chrysler 200
I have recently purchased 2 Lectric XP4. I need to add a class 1 receiver to a Chrysler 200 4 cylinder 800 total weight for the car. The bikes are 71 pounds with battery. What are my options for an ebike rack? Thanks in advance. | Hi Gregg! We...
Trailer Hitch Recommendation for a 2012 Chrysler 200 Convertible
The hitch Im looking at is for the Chrysler 200. I have the 200 convertible . Are they the same ? | There is a confirmed fit for a 2012 Chrysler 200 convertible and it is Curt Hitch # C11133. The Draw-Tite hitch is not yet a confirmed fit....
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Flat Tow Wiring Harness For A 2013 Chrysler 200
I have a 2013 Chrysler 200 which we tow on a Kar kaddy I was looking for a connector that I can connect to the front of the car wiring so the tail lights on the car would also show turn and stop lights Do you have something like that? | Yes...
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Trailer Hitch and Wiring for a 2012 Chrysler 200
Can I use this hitch on my Chrysler 200 to tow a small pop up camper? | Draw-Tite trailer hitch # 24871 for the 2012 Chrysler 200 is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. Provided that the trailer is within...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Recommended Hitch for a 2015 Chrysler 200
hello good morning I am very interested in buying a hitch trailer for my 2015 Chrysler 200c. Thank you | To add a hitch to your 2015 Chrysler 200, I recommend the Curt item # C11403. This hitch is custom fit and bolts to your Chrysler with included...
Replacement Bike Rack Cradle For A Rhode Gear Bike Rack
Do you carry any replacement cradles that will fit a 7/8inch diameter tube as I have on an older Rhode Gear 2-bike Hitch Shuttle rack? Thanks! | When it comes to the replacement cradles for your Rhode Gear 2 Bike Rack The Replacement Cradle...
How To Choose Correct Bearing Buddy for Tractor Supply Small Utility Trailer
I measured the hub and ordered the Bearing Buddy that measured 1.968. That is a little bit too small. Is Bearing Buddy that measures 1.980 the best option for this hub? | The correct Bearing Buddy Bearing Protector like part # BB1980A will be...
Recommended Bike Rack and Trailer Hitch Receiver 2012 Chrysler 200 Convertible
installation of a hitch to carry two bikes on a 2012 Chrysler 200 convertible hard top can I have a hitch installed on this car I already have the support plattform for two bikes thank you | We have two trailer hitch receivers for your 2012...
Where Does Kat's Engine Block Heater Install on 2012 Chrysler 200 3.6 Liter Install
Where is the location to install a block heater on a 2013 chrysler 200 3.6 L. | Your 2013 Chrysler 200 has the transverse Pentastar 3.6 liter which Kat's recommends their heater part # KH11814. The cartridge location you need to use is right...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Recommended Roof Rack And Kayak Carrier For 2012 Chrysler 200
My son has a 2012 chrysler 200 with a regular roof. He has a fishing kayak that he would like to transport with his vehicle. Would like to know if they make carriers for his vehichle and if so what is the best system? Thank you for your help....
Measurements on the Curt Trailer Hitch Class II Receiver
I have some questions about the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 Item # C12064 I need to know the measurement between the frame rails and the height of the frame rails. I want to see if I can custom adapt it to a...
Troubleshooting Carriage Bolt that Keeps Turning When Installing Draw Tite 24919
I just installed a Draw Tite hitch on my 2014 Chrysler 200 with twin exhaust pipes, when I tried to tighten one of the bolts the bolt just kept turning with the nut once it was tightened. So I could not torque it. BTW Its much harder to put...
Recommended Trailer Hitch Cargo Carrier For Pop-Up Tent
Can you recommend a product that I can attached a hitch receiver for my 2015 Chrysler 200 to use a small pop up tent. | There is not a hitch mounting application for a tent if that is what you are referring to. We have some tents that attach...
Filter Your Search
Contact and Help